Thin films from modified Poly(glycolic acid) with excellent water vapor barrier

Commercial biodegradable polymers that combine high oxygen and water vapor barrier properties are scarce. In the packaging industry multilayer materials are usually used to achieve the barrier requirements, however they are usually not recyclable and will not biodegrade when discarded. The outstandi...

Full description

Autores:
Hilhorst, Marieke
Caliari, Sara
Post, Wouter
Kuijpers, Lambertus J.
Alvarado Chacon, Fresia
Tipo de recurso:
Conferencia (Ponencia)
Fecha de publicación:
2024
Institución:
Universidad de los Andes
Repositorio:
Séneca: repositorio Uniandes
Idioma:
eng
OAI Identifier:
oai:repositorio.uniandes.edu.co:1992/76040
Acceso en línea:
https://hdl.handle.net/1992/76040
https://doi.org/10.51573/Andes.PPS39.GS.FARP.1
https://repositorio.uniandes.edu.co/
Palabra clave:
Poly(glycolic acid) (PGA)
Barrier properties
Chain Extenders
Thin Films
Rights
openAccess
License
https://repositorio.uniandes.edu.co/static/pdf/aceptacion_uso_es.pdf
Description
Summary:Commercial biodegradable polymers that combine high oxygen and water vapor barrier properties are scarce. In the packaging industry multilayer materials are usually used to achieve the barrier requirements, however they are usually not recyclable and will not biodegrade when discarded. The outstanding barrier properties of poly(glycolic acid) (PGA) make it an excellent candidate for a biodegradable oxygen and water vapor barrier packaging material. At the same time, its processability into films using standard converting equipment is a major challenge. Low melt strength, high processing temperatures, and fast crystallization at the die limit its use in conventional packaging applications. Chain extenders are typically used to improve the melt strength of polymers and thereby the overall processability, however they may affect the intrinsic barrier properties of the material. This work studied the reactivity of PGA with different chain extenders. It found that by using less than 2% reactive chain extenders the processability of PGA could be highly improved while keeping the intrinsic barrier properties of the material. After compounding PGA with the chain extenders Joncryl and carbodiimide, stable flat sheet extrusion of the material was possible resulting in sheets thinner than 10 μm. The multidirectional stretchability of the melt was improved, showing an increase in the melt strength of the polymer. Barrier properties were measured, and it was found that the water vapor transmission rate (WVTR) is not affected by the addition of the chain extender. This improvement in the processability of PGA offers a promising solution for biodegradable high-barrier packaging materials.