Hyperbranched polyester polyol modified with polylactic acid as a compatibilizer for plasticized tapioca starch/polylactic acid blends
ABSTRACT: A hyperbranched polyester polyol of the second generation (HBP2) was modified with polylactic acid (HBP2-g-PLA) and employed as a compatibilizer for plasticized tapioca starch (TPS)/polylactic acid (PLA) blends. The effect of the compatibilizer HBP2-g-PLA was evaluated in comparison to the...
- Autores:
-
Mesías Álvarez, Ricardo Esteban
Murillo Ruiz, Edwin Alberto
- Tipo de recurso:
- Article of investigation
- Fecha de publicación:
- 2018
- Institución:
- Universidad de Antioquia
- Repositorio:
- Repositorio UdeA
- Idioma:
- eng
- OAI Identifier:
- oai:bibliotecadigital.udea.edu.co:10495/33513
- Acceso en línea:
- https://hdl.handle.net/10495/33513
- Palabra clave:
- Biopolímeros
Biopolymers
Poliésteres
Polyesters
Tapioca
http://aims.fao.org/aos/agrovoc/c_27468
http://aims.fao.org/aos/agrovoc/c_6082
http://aims.fao.org/aos/agrovoc/c_15525
- Rights
- openAccess
- License
- https://creativecommons.org/licenses/by/4.0/
| Summary: | ABSTRACT: A hyperbranched polyester polyol of the second generation (HBP2) was modified with polylactic acid (HBP2-g-PLA) and employed as a compatibilizer for plasticized tapioca starch (TPS)/polylactic acid (PLA) blends. The effect of the compatibilizer HBP2-g-PLA was evaluated in comparison to the control sample (TPS/PLA blend without HBP2-g‑PLA). The torque value of the TPS/PLA blends with HBP2-g-PLA was lower than that of the control sample, while thermal stability and crystallinity followed opposite behavior. The glass transition temperature (Tg) and degree of crystallinity of the TPS/PLA blends with HBP2-g-PLA decreased with increasing mass fraction of HBP2-g-PLA. By scanning electron microscopy (SEM), it was observed that the morphology of the TPS/PLA blends with HBP2-g-PLA was more homogeneous than that of the control sample, confirming that HBP2-g-PLA acted as a compatibilizer and plasticizing agent to the TPS/PLA blends. Rheological analysis of the compatibilized TPS/PLA blends indicated the presence of microstructure. |
|---|
