Benzophenone-3 Ultrasound Degradation in a Multifrequency Reactor: Response Surface Methodology Approach

Response Surface Methodology was used for optimizing operating variables for a multi-frequency ultrasound reactor using BP-3 as a model compound. The response variable was the Triclosan degradation percent after 10 sonication min. Frequency at levels from 574, 856 and 1134 kHz were used. Power density, pulse time (PT), silent time (ST) and PT/ST ratio effects were also analyzed. 22 and 23 experimental designs were used for screening purposes and a central composite design was used for optimization. An optimum value of 79.2% was obtained for a frequency of 574 kHz, a power density of 200 W/L, and a PT/ST ratio of 10. Significant variables were frequency and power level, the first having an optimum value after which degradation decreases while power density level had a strong positive effect on the whole operational range. PT, ST, and PT/ST ratio were not significant variables although it was shown that pulsed mode ultrasound has better degradation rates than continuous mode ultrasound; the effect less significant at higher power levels.

• Autores: Vega Garzón, Lina Patricia; Gómez Miranda, Ingry Natalia; Peñuela Mesa, Gustavo Antonio
• Tipo de recurso: Article of investigation
• Fecha de publicación: 2018
• Institución: Universidad de Antioquia
• Repositorio: Repositorio UdeA
• Idioma: eng
• OAI Identifier: oai:bibliotecadigital.udea.edu.co:10495/46762
• Acceso en línea: https://hdl.handle.net/10495/46762
• Palabra clave: Sonoquímica; Sonochemistry; Reacciones químicas; Chemical reactions; Ultrasonido; Ultrasonics; Benzofenona-3; Benzophenone-3; http://id.loc.gov/authorities/subjects/sh91005029; ODS 3: Salud y bienestar. Garantizar una vida sana y promover el bienestar de todos a todas las edades
• Rights: openAccess
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/