Combined optimal tap setting and reactive power injection for loss reduction in distribution systems
ABSTRACT: This paper presents an optimization model for a combined scheme of optimal tap setting and reactive power injection in distribution systems. The proposed model provides the reactive power injection and tap setting scheme that would minimize losses, keeping voltage magnitudes within specifi...
- Autores:
-
López Lezama, Jesús María
Gallego Rendón, Ramón Alfonso
Granada Echeverri, Mauricio
- Tipo de recurso:
- Article of investigation
- Fecha de publicación:
- 2014
- Institución:
- Universidad de Antioquia
- Repositorio:
- Repositorio UdeA
- Idioma:
- eng
- OAI Identifier:
- oai:bibliotecadigital.udea.edu.co:10495/36344
- Acceso en línea:
- https://hdl.handle.net/10495/36344
- Palabra clave:
- Distribución (teoría de la probabilidad)
Distribution (Probability theory)
http://id.loc.gov/authorities/subjects/sh85038545
Potencia Reactiva (Ingeniería Electrica)
Reactive power (electrical engineering)
Reducción de pérdidas
Inyecciones de reactivos
- Rights
- openAccess
- License
- https://creativecommons.org/licenses/by-nc-nd/4.0/
| Summary: | ABSTRACT: This paper presents an optimization model for a combined scheme of optimal tap setting and reactive power injection in distribution systems. The proposed model provides the reactive power injection and tap setting scheme that would minimize losses, keeping voltage magnitudes within specified limits, at minimum cost. The formulation is done as an optimal reactive power flow and is solved using commercial available software. Several tests are performed on a 33-bus distribution test system. The results obtained showed that the combined use of tap setting and reactive power injection leads to higher loss reduction than the use of any of these actions separately. |
|---|