Caracterización fisicomecánica de concreto polimérico basado en resina poliéster
Th is paper publishes the results obtained from the design of polymer concrete (PC) by the method of free spaces, for which it was used a polyester resin as a erephthalic binder, ceramic powder and blast furnace slag as fi llers and River sand and granite, as aggregates. With the resin content was d...
- Autores:
-
Valencia Zapata, Mayra Eliana
Collazos, Paola A.
Mina, José H.
Toro, Edward Fernando
- Tipo de recurso:
- Fecha de publicación:
- 2010
- Institución:
- Universidad de San Buenaventura
- Repositorio:
- Repositorio USB
- Idioma:
- spa
- OAI Identifier:
- oai:bibliotecadigital.usb.edu.co:10819/5091
- Acceso en línea:
- http://hdl.handle.net/10819/5091
- Palabra clave:
- Concreto polimérico
Resina poliéster
Filler
Escoria de alto horno
Polvo cerámico
Polymer concrete
Polyester resin
Filler
Blast furnace slag
Ceramic powder
Concreto
Resinas
- Rights
- License
- Atribución-NoComercial-SinDerivadas 2.5 Colombia
| Summary: | Th is paper publishes the results obtained from the design of polymer concrete (PC) by the method of free spaces, for which it was used a polyester resin as a erephthalic binder, ceramic powder and blast furnace slag as fi llers and River sand and granite, as aggregates. With the resin content was determined the infl uence on the mechanical and physical properties of the material by analyzing a parameter called fi ller mass ratio / mass-resin (Mf/MR), which can be considered as equivalent to the relationship water / cement of the Portland cement concrete. The mechanical and physical properties increased with the ratio (Mf/MR), increase. |
|---|