Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal
Spa: En esta investigación se evaluó el comportamiento del cobre con adiciones de partículas de titanio y carburo de titanio, con fracciones en masa de titanio de 10%, 15% y 20% con el propósito de caracterizar la respuesta del MMC, manteniendo un porcentaje de agregado cerámico de carburo de titani...
- Autores:
- Tipo de recurso:
- masterThesis
- Fecha de publicación:
- 2019
- Institución:
- Universidad Pedagógica y Tecnológica de Colombia
- Repositorio:
- RiUPTC: Repositorio Institucional UPTC
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uptc.edu.co:001/3698
- Acceso en línea:
- http://repositorio.uptc.edu.co/handle/001/3698
- Palabra clave:
- Compuestos metálicos
Materiales compuestos
Resistencia de materiales
Sinterización
Metalurgia de polvos
Ciencia de los materiales
Maestría en Metalurgia y Ciencia de los Materiales - Tesis y disertaciones académicas
- Rights
- openAccess
- License
- Copyright (c) 2019 Universidad Pedagógica y Tecnológica de Colombia
| id |
REPOUPTC_da125bfd5e480f7a182ebd56ab8a7384 |
|---|---|
| oai_identifier_str |
oai:repositorio.uptc.edu.co:001/3698 |
| network_acronym_str |
REPOUPTC |
| network_name_str |
RiUPTC: Repositorio Institucional UPTC |
| repository_id_str |
|
| dc.title.none.fl_str_mv |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| title |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| spellingShingle |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal Bohórquez Moreno, Cristian Daniel Compuestos metálicos Materiales compuestos Resistencia de materiales Sinterización Metalurgia de polvos Ciencia de los materiales Maestría en Metalurgia y Ciencia de los Materiales - Tesis y disertaciones académicas |
| title_short |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| title_full |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| title_fullStr |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| title_full_unstemmed |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| title_sort |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal |
| dc.creator.none.fl_str_mv |
Bohórquez Moreno, Cristian Daniel |
| author |
Bohórquez Moreno, Cristian Daniel |
| author_facet |
Bohórquez Moreno, Cristian Daniel |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Pérez Velásquez, Sandra Patricia Mendoza Oliveros, Martín Emilio |
| dc.subject.none.fl_str_mv |
Compuestos metálicos Materiales compuestos Resistencia de materiales Sinterización Metalurgia de polvos Ciencia de los materiales Maestría en Metalurgia y Ciencia de los Materiales - Tesis y disertaciones académicas |
| topic |
Compuestos metálicos Materiales compuestos Resistencia de materiales Sinterización Metalurgia de polvos Ciencia de los materiales Maestría en Metalurgia y Ciencia de los Materiales - Tesis y disertaciones académicas |
| description |
Spa: En esta investigación se evaluó el comportamiento del cobre con adiciones de partículas de titanio y carburo de titanio, con fracciones en masa de titanio de 10%, 15% y 20% con el propósito de caracterizar la respuesta del MMC, manteniendo un porcentaje de agregado cerámico de carburo de titanio del 1%, debido a que este valor se ha determinado como el apropiado para este tipo de materiales compuestos 7 . Mediante el empleo de la ruta pulvimetalúrgia como técnica de conformado de MMC sinterizados por medio de descarga luminiscente anormal, por ser un proceso novedoso frente a los medios convencionales de sinterización como hornos o muflas, debido al aprovechamiento de las densidades energéticas que ofrece esta técnica 8,9 (bajos consumos de energía) y amigable con el medio ambiente debido a las emisión de especies neutras al medio ambiente, todo ello con el propósito de ampliar el espectro de científico y técnico en el área de este tipo de materiales. |
| publishDate |
2019 |
| dc.date.none.fl_str_mv |
2019 2021-08-30T14:32:55Z 2021-08-30T14:32:55Z |
| dc.type.none.fl_str_mv |
Trabajo de grado - Maestría http://purl.org/coar/resource_type/c_bdcc http://purl.org/coar/resource_type/c_18cf info:eu-repo/semantics/masterThesis info:eu-repo/semantics/publishedVersion Text https://purl.org/redcol/resource_type/TM http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| format |
masterThesis |
| status_str |
publishedVersion |
| dc.identifier.none.fl_str_mv |
Bohórquez Moreno, C. D. (2019). Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal. (Tesis de maestría). Universidad Pedagógica y Tecnológica de Colombia, Tunja. http://repositorio.uptc.edu.co/handle/001/3698 http://repositorio.uptc.edu.co/handle/001/3698 |
| identifier_str_mv |
Bohórquez Moreno, C. D. (2019). Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal. (Tesis de maestría). Universidad Pedagógica y Tecnológica de Colombia, Tunja. http://repositorio.uptc.edu.co/handle/001/3698 |
| url |
http://repositorio.uptc.edu.co/handle/001/3698 |
| dc.language.none.fl_str_mv |
spa |
| language |
spa |
| dc.relation.none.fl_str_mv |
AKBARPOUR, M. R. y JAVADHESARI, S. Moniri. Wear performance of novel nanostructured Ti-Cu intermetallic alloy as a potential material for biomedical applications. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 699, p. I- AKBARPOUR, Mohammad Reza y HESARI, Feridoun Alikhani. Characterization and hardness of TiCu–Ti2Cu3 intermetallic material fabricated by mechanical alloying and subsequent annealing. En: Materials Research Express. 2016. vol. 3, no. 4, p. 45004-45004 ALANEME, Kenneth Kanayo y ODONI, Benjamin Ufuoma. Mechanical properties, wear and corrosion behavior of copper matrix composites reinforced with steel machining chips. 2016 AMERICAN SOCIETY FOR, Testing y MATERIALS. Astm B962-13 Standard test methods for density of compacted or sintered powder metallurgy (PM) products using archimedes’ Principle. En: 2013. vol. 2, p. 1-7 AMERICAN SOCIETY FOR, Testing y MATERIALS. Standard Test Method for Microindentation Hardness of Powder Metallurgy ( P / M ). 2005, p. 14-16 BAGHERI, Gh A. The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles. 2016 BARSOUKOV, E. y MACDONALD, J.R. Impedance Spectroscopy: Theory, Experiment, and Applications. Wiley, 2005. 9780471716228. BUYTOZ, Soner, DAGDELEN, Fethi, ISLAK, Serkan, KOK, Mediha, KIR, Durmus y ERCAN, Ercan. Effect of the TiC content on microstructure and thermal properties of Cu-TiC composites prepared by powder metallurgy. En: Journal of Thermal Analysis and Calorimetry. 2014, p. 1277-1283 CAI, Qingshan, LIU, Wensheng, MA, Yunzhu, ZHU, Wentan y PANG, Xinkuan. Effect of joining temperature on the microstructure and strength of W–steel HIP joints with Ti/Cu composite interlayer. En: Journal of Nuclear Materials. 2018. vol. 507, p. 198-207. CANALE, P. y SERVANT, C. Thermodynamic Assessment of the Cu–Ti System Taking into Account the New Stable Phase CuTi3. En: Zeitschrift für Metallkunde. 2002. vol. 93, no. 4, p. 273-276. CHAPMAN, B. Glow Discharge Processes: Sputtering and Plasma Etching. Wiley, 1980. 9780471078289. CHEN, Feifan, WANG, Wei, WANG, Kang, HO, Pofeng, LI, Han, HUANG, Xi y CHEN, Weijie. Influence of post-weld heat treatment on microstructure and adhesion of Ti/Cu composite. En: Materials Science and Technology (United Kingdom). 2018. vol. 34, no. 12, p. 1441-1446. CHEN, Q., LI, D. Y. y COOK, Bruce. Is porosity always detrimental to the wear resistance of materials?-A computational study on the effect of porosity on erosive wear of TiC/Cu composites. En: Wear. 2009. vol. 267, no. 5-8, p. 1153-1159 CHUISTOV, K. V. Copper–Titanium Solid Solutions are a New Generation of High Strength Age-Hardening Alloys. En: Uspehi Fiziki Metallov. 2005. vol. 6, no. 1, p. 55- 103 CHUNG, Chih Yu, LEE, Mu Tse, TSAI, Min Yen, CHU, Chao Hung y LIN, Su Jien. High thermal conductive diamond/Cu-Ti composites fabricated by pressureless sintering technique. En: Applied Thermal Engineering. 2014. vol. 69, no. 1-2, p. 208- 213 COPPER DEVELOPMENT ASSOCIATION, Inc. Copper powder consolidation techniques. Compaction, Solid state sintering, liquid phase sintering, 2017. DINAHARAN, Issac, SATHISKUMAR, Ramasamy y MURUGAN, Nadarajan. Effect of ceramic particulate type on microstructure and properties of copper matrix composites synthesized by friction stir processing. 2016 FRIDMAN, Alexander. Plasma Chemistry. Cambridge: Cambridge University Press, 2008. 9780521847353. GAO, Xin, YUE, Hongyan, GUO, Erjun, ZHANG, Shaolin, YAO, Longhui, LIN, Xuanyu, WANG, Bao y GUAN, Enhao. Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets. En: Journal of Materials Science & Technology. 2018. vol. 34, no. 10, p. 1925-1931 GERMAN, R. M. y PARK, S. J. Handbook of Mathematical Relations in Particulate Materials Processing: Ceramics, Powder Metals, Cermets, Carbides, Hard Materials, and Minerals. Wiley, 2009. (Wiley Series on Processing of Engineering Materials). 9780470368725. GERMAN, Randall M. Particulate composites: Fundamentals and applications. Wiley Series on Processing of Engineering Materials, 2016. 1-436 p. 9783319299174 GÓMEZ TURRIÓN, Sergio. Materiales compuestos con propiedades a la carta. Diseño de interfases. 2008, p. 337-337 GRANTA DESIGN, Cambridge U. K. Propiedades materiales. 2013) GUO, Chun, ZHOU, Jiansong, YU, Youjun, WANG, Lingqian, ZHOU, Huidi y CHEN, Jianmin. Microstructure and tribological properties of Ti-Cu intermetallic compound coating. En: Materials and Design. 2012. vol. 36, p. 482-489 HERNANDEZ-SANTIAGO, Felipe, LOPEZ-HIRATA, Victor M., HERNANDEZ DURAN, Pamela E., SAUCEDO-MUÑOZ, Maribel L. y AVILA-DAVILA, Erika O. Analysis of β´ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion Couple Methods. 2017, p. 783-789. HOLLAND, Lawrence Rozier. Physical properties of titanium. III. the specific heat. En: Journal of Applied Physics. 1963. vol. 34, p. 2350-2357 ICSG. International copper study group. IGHARO, M. y WOOD, J. V. Compaction and Sintering Phenomena in Titanium Nickel Shape Memory Alloys. En: Powder Metallurgy. 1985. vol. 28, no. 3, p. 131- 139 INSTITUTO EUROPEO DEL, cobre. Casi un tercio del cobre que se utiliza cada año en todo el mundo proviene del reciclaje. 2017). INTERNATIONAL, A. S. M. Powder Metallurgy. 2005. INTERNATIONAL, A. S. M. y HANDBOOK, Committee. ASM handbook. Volume 3, Volume 3. Materials Park, Ohio: ASM International, 1992. 0871703815 9780871703811. KANG, Suk-Joong L. SINTERING:Densification, Grain Growth&Microstructure. En: Sintering. 2005, p. 1-261 KARAKULAK, Erdem. Characterization of Cu–Ti powder metallurgical materials. En: International Journal of Minerals, Metallurgy, and Materials. 2017. vol. 24, no. 1, p. 83-90 KLEIN, A. N., CARDOSO, R. P., PAVANATI, H. C., BINDER, C., MALISKA, A. M., HAMMES, G., FUSAO, D., SEEBER, A., BRUNATTO, S. F. y MUZART, J. L. R. DC plasma technology applied to powder metallurgy: An overview. En: Plasma Science and Technology. 2013. vol. 15, no. 1, p. 70-81 KUMAR, Sanjeev, SAINI, Deepak, LOTEY, Gurmeet Singh y VERMA, N. K. Electrochemical synthesis of copper nanowires in anodic alumina membrane and their impedance analysis. En: Superlattices and Microstructures. 2011. vol. 50, no. 6, p. 698-702 KUNDU, S., GHOSH, M., LAIK, A., BHANUMURTHY, K., KALE, G. B. y CHATTERJEE, S. Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. En: Materials Science and Engineering A. 2005. vol. 407, no. 1-2, p. 154-160 KUNDU, Sukumar, CHAKRABORTY, Asmita y MISHRA, Brajendra. Interfacial reaction and microstructure study of DSS/Cu/Ti64 diffusion-welded couple. En: Welding in the World. 2018. vol. 62, no. 1, p. 155-167 LAIK, Arijit, BHANUMURTHY, Karanam, KALE, Gajanan Balaji y KASHYAP, Bhagwati Prasad. Diffusion characteristics in the Cu-Ti system. En: International Journal of Materials Research. 2012. vol. 103, no. 6, p. 661-672 LAUGHLIN, David E. y CAHN, John W. Spinodal decomposition in age hardening copper-titanium alloys. En: Acta Metallurgica. 1975/03/01/, 1975. vol. 23, no. 3, p. 329-339 LENG, Y. Materials Characterization: Introduction to Microscopic and Spectroscopic Methods. Wiley, 2009. 9780470822999. LI, Jianwei, ZHANG, Hailong, WANG, Luhua, CHE, Zifan, ZHANG, Yang, WANG, Jinguo, KIM, Moon J. y WANG, Xitao. Optimized thermal properties in diamond particles reinforced copper-titanium matrix composites produced by gas pressure infiltration. En: Composites Part A: Applied Science and Manufacturing. 2016. vol. 91, p. 189-194 LI, Xinmin y OLOFSSON, Ulf. A study on friction and wear reduction due to porosity in powder metallurgic gear materials. En: Tribology International. 2017. vol. 110, no. May 2016, p. 86-95 LIANG, Yunhong, HAN, Zhiwu, LI, Xiujuan, ZHANG, Zhihui y REN, Luquan. Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu-Ti-C system. En: Materials Chemistry and Physics. 2012. vol. 137, no. 1, p. 200-206 LIU, Jia, WANG, Xian hui, RAN, Qian ni, ZHAO, Gang y ZHU, Xiu xiu. Microstructure and properties of Cu–3Ti–1Ni alloy with aging process. En: Transactions of Nonferrous Metals Society of China (English Edition). 2016. vol. 26, no. 12, p. 3183- 3188 LIU, Zhilong, PATZIG, Christian, SELLE, Susanne, HÖCHE, Thomas, GUMBSCH, Peter y GREINER, Christian. Stages in the tribologically-induced oxidation of high purity copper. En: Scripta Materialia. 2018. vol. 153, p. 114-117 LIU, Zhiqiang, JI, Feifei, WANG, Mingqiang y ZHU, Tianyu. Study on the Tribological Properties of Porous Titanium Sliding against Tungsten Carbide YG6. En: Metals. 2017. vol. 7, no. 1, p. 28-28 LU, Jianbang, SHU, Shili, QIU, Feng, WANG, Yawei y JIANG, Qichuan. Compression properties and abrasive wear behavior of high volume fraction TiC x – TiB 2 /Cu composites fabricated by combustion synthesis and hot press consolidation. En: JOURNAL OF MATERIALS&DESIGN. 2012. vol. 40, p. 157-162 LUAÑA, Víctor y RECIO, José Manuel. Espectroscopía molecular, 2002 MARK, Brininstool. Copper statistics, mineral commodity summaries. En: U.S. Geological Survey. 2015, no. 703, p. 2014-2015 MATERIALS, American Society For Testing. Standard Test Method for Wear Testing with a Pin-on-Disk. vol. v, p. 1-5 MENEZES, Pradeep L., NOSONOVSKY, Michael, INGOLE, Sudeep Prabhakar, KAILAS, Satish V. y LOVELL, Michael R. Tribology for scientists and engineers : from basics to advanced concepts. 2013 ed: Springer-Verlag New York, 2013. 9781461419457. MOGHANIAN, Amirhossein, SHARIFIANJAZI, Fariborz, ABACHI, Parvin, SADEGHI, Ehsan, JAFARIKHORAMI, Hassan y SEDGHI, Arman. Production and properties of Cu/TiO2 nano-composites. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 698, p. 518-524 MORARU, Corina Gabriela, POP, Mihai Alin y BEDO, Tibor. Problems encountered with microwave sintering of copper based metal matrix composites. 2013. vol. 2013, no. 65, p. 18-23 MORARU, Corina Gabriela, POP, Mihai Alin, BEDO, Tibor y ERBAN, Cornel Eugen Ș. Spark plasma sintering of novel copper based metal matrix composites. 2013. vol. 2013, no. 65 MUNIR, Z. A., ANSELMI-TAMBURINI, U. y OHYANAGI, M. The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. En: Journal of Materials Science. February 01, 2006. vol. 41, no. 3, p. 763-777 NAGARJUNA, S., BALASUBRAMANIAN, K. y SARMA, D. S. Effect of Ti additions on the electrical resistivity of copper. En: Materials Science and Engineering A. 1997. vol. 225, p. 118-124 NAYAK, D. y DEBATA, M. Effect of composition and milling time on mechanical and wear performance of copper?graphite composites processed by powder metallurgy route. En: Powder Metallurgy. 2013. vol. 000, no. 000, p. 1-9 NAYAN, Niraj, SHUKLA, Anoop K., CHANDRAN, Prathap, BAKSHI, Srinivasa Rao, MURTY, S. V. S. N., PANT, Bhanu y VENKITAKRISHNAN, P. V. Processing and characterization of spark plasma sintered copper/carbon nanotube composites. En: Materials Science and Engineering: A. 2016. vol. 682, no. November 2016, p. 229- 237 NEMATI, N., KHOSROSHAHI, R., EMAMY, M. y ZOLRIASATEIN, A. Investigation of microstructure, hardness and wear properties of Al–4.5wt.% Cu–TiC nanocomposites produced by mechanical milling. En: Materials & Design. 2011. vol. 32, no. 7, p. 3718-3729 OMORI, Mamoru. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS). En: Materials Science and Engineering: A. 2000/08/15/, 2000. vol. 287, no. 2, p. 183-188 PÉREZ-VELÁSQUEZ, Sandra, PINEDA-TRIANA, Yaneth, AGUILAR-CASTRO, Yesid y VERA-LÓPEZ, Enrique. Efecto del porcentaje de refuerzo frente al desgaste en compuestos de matriz metálica sinterizados con descarga luminiscente anormal. En: Revista de Metalurgia. 2016. vol. 52, no. 1, p. e059-e059 PINA, V. Guiñon, AMIGÓ, V. y MUÑOZ, A. Igual. Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys. En: Corrosion Science. 2016. vol. 109, p. 115-125 RABINOWICZ, E. Friction and Wear of Materials. Second edi ed1995. RAJKUMAR, K. y ARAVINDAN, S. Tribological performance of microwave sintered copperTiCgraphite hybrid composites. En: Tribology International. 2011. vol. 44, no. 4, p. 347-358 ROSENBOHM, Jaeger y FONTEYNE, R. The Exact Measurement of the Specific Heats of Metals at High Temperatures. XXIII. The Calorimetrical, Electrical and Thermoelectrical Behaviour of Ductile Titanium. I. 1936. vol. 515, p. 442-452 RUŽI, J., STAŠI, J., RAJKOVI, V. y BOŽI, D. Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys. En: Materials and Design. 2013. vol. 49, p. 746-754 SABBAGHIAN, M., SHAMANIAN, M., AKRAMIFARD, H. R. y ESMAILZADEH, M. Effect of friction stir processing on the microstructure and mechanical properties of Cu-TiC composite. En: Ceramics International. 2014. vol. 40, no. 8 PART B, p. 12969-12976 SANTOS, Armando Sarmiento, ARTURO, Carlos y VARGAS, Parra. Aplicación de la descarga luminiscente anormal como una fuente calórica Applying anormal glow discharge as a caloric source. 2017. vol. 8, p. 25-29 SARMIENTO-SANTOS, Armando, ROJAS-SÁNCHEZ, César Enrique y CEPEDA GRIMALDOS, José Fernando. Comportamiento de la descarga luminiscente anormal dependiendo de la atmósfera gaseosa en un sistema apto para tratamiento de materiales. En: Respuestas; Vol. 18, Núm. 1 (2013) DO - 10.22463/0122820X.371. 06/15/, 2013 SARMIENTO-SANTOS, Armando. Comportamiento de la descarga luminiscente anormal dependiendo de la atmósfera gaseosa en un sistema apto para tratamiento de materiales. 2013. vol. 18 SATHISKUMAR, R., MURUGAN, N., DINAHARAN, I. y VIJAY, S. J. Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing. En: Materials Characterization. 2013. vol. 84, p. 16-27 SEMBOSHI, Satoshi, ORIMO, Shin-ichi, SUDA, Hisashi, GAO, Weilin y SUGAWARA, Akira. Aging of Copper-Titanium Dilute Alloys in Hydrogen Atmosphere: Influence of Prior-Deformation on Strength and Electrical Conductivity. En: Materials Transactions. 2011. vol. 52, no. 12, p. 2137-2142 SINGH, Manvandra Kumar y GAUTAM, Rakesh Kumar. Mechanical and tribological properties of plastically deformed copper metal matrix nano composite. En: Materials Today: Proceedings. 2018. vol. 5, p. 5727-5736 SMITH, W. F. y HASHEMI, J. Fundamentos de la ciencia e ingeniería de materiales. McGraw-Hill, 2006. 9789701056387. SOFFA, W. A. y LAUGHLIN, D. E. High-strength age hardening copper–titanium alloys: redivivus. En: Progress in Materials Science. 2004/01/01/, 2004. vol. 49, no. 3, p. 347-366 SZWED, B. y KONIECZNY, M. Influence of diffusion bonding parameters on the structure and properties of titanium and stainless steel joints with copper interlayer. En: Journal of Achievements in Materials and Manufacturing Engineering. 2014. vol. 67, no. 1, p. 21-25 THANKACHAN, Titus y PRAKASH, K. Soorya. Microstructural, mechanical and tribological behavior of aluminum nitride reinforced copper surface composites fabricated through friction stir processing route. En: Materials Science and Engineering: A. 2017. vol. 688, p. 301-308 TOSUN, Gul, KILIC, Musa, OZLER, Latif y TOSUN, Nihat. Characterization of a porous Nickel-Titanium alloy produced with self-propagating high-temperature synthesis. En: Materiali in Tehnologije. 2018. vol. 52, no. 4, p. 435-442 TUNAY, Recai Fatih y KURBANOǦLU, Cahit. Investigation of the tribological properties of Cu-based porous bearings. En: Industrial Lubrication and Tribology. 2012. vol. 64, no. 2, p. 111-119 UZUNOV, Tz D., LAMBOV, S. I. y STOJANOV, St P. Kinetics of solid-phase interactions in thin-film Cu/Ti system with an excess of Cu. En: Vacuum. 1996. vol. 47, no. 1, p. 61-65 UZUNOV, Tz D., LAMBOV, S. I. y STOJANOV, St P. Kinetics of solid-phase interactions in thin-film Cu/Ti system with an excess of Ti. En: Vacuum. 1996. vol. 47, no. 1, p. 61-65 VENKATESWARAN, K., KAMARAJ, M. y RAO, K. Prasad. Dry sliding wear of a powder metallurgy copper-based metal matrix composite reinforced with iron aluminide intermetallic particles. En: Journal of Composite Materials. 2007. vol. 41, no. 14, p. 1713-1728 VILLAIN, S., DESVALS, M. A., CLUGNET, G. y KNAUTH, P. CuBr by impedance spectroscopy. En: Solid State Ionics. 1996. vol. 83, no. 3, p. 191-198 WANG, C. P., LUO, Y. S., LU, Y., HAN, J. J., SHI, Z., GUO, Y. H. y LIU, X. J. Interdiffusion and Atomic Mobilities in bcc Ti-Ga and Ti-Cu Alloys. En: Journal of Phase Equilibria and Diffusion. 2017. vol. 38, no. 2, p. 84-93 WANG, Fenglin, LI, Yunping, WAKOH, Kimio, KOIZUMI, Yuichiro y CHIBA, Akihiko. Cu-Ti-C alloy with high strength and high electrical conductivity prepared by two step ball-milling processes. En: Materials and Design. 2014. vol. 61, p. 70-74 WANG, Fenglin, LI, Yunping, WANG, Xiaoyu, KOIZUMI, Yuichiro, KENTA, Yamanaka y CHIBA, Akihiko. In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2016. vol. 657, p. 122-132 WANG, Fenglin, LI, Yunping, XIE, Guoqiang, WAKOH, Kimio, YAMANAKA, Kenta, KOIZUMI, Yuichiro y CHIBA, Akihiko. Investigation on hot deformation behavior of nanoscale TiC-strengthened Cu alloys fabricated by mechanical milling. En: Materials Science and Engineering A. 2016. vol. 668, p. 1-12 WANG, Fenglin, LI, Yunping, YAMANAKA, Kenta, WAKON, Kimio, HARATA, Koichi y CHIBA, Akihiko. Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys. En: Materials and Design. 2014. vol. 64, p. 441-449 WANG, Xianlong, DING, Haimin, QI, Fugong, LIU, Qing, FAN, Xiaoliang y SHI, Yu. Mechanism of in situ synthesis of TiC in Cu melts and its microstructures. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 695, p. 3410-3418 XIAO, Yelong, YAO, Pingping, ZHOU, Haibin, ZHANG, Zhongyi, GONG, Taimin, ZHAO, Lin, ZUO, Xiaoting, DENG, Minwen y JIN, Zongxiang. Friction and wear behavior of copper matrix composite for spacecraft rendezvous and docking under different conditions. En: Wear. 2014. vol. 320, no. 1, p. 127-134 YAN, M. F., ZHU, Y. D., ZHANG, C. S., ZHANG, Y. X., WANG, Y. X. y YANG, L. Microstructure and mechanical properties of copper-titanium-nitrogen multiphase layers produced by a duplex treatment on C17200 copper-beryllium alloy. En: Materials and Design. 2015. vol. 84, p. 10-17 YANG, Jian, HUANG, Jihua, YE, Zheng, FAN, Dongyu, CHEN, Shuhai y ZHAO, Yue. First-principles calculations on structural energetics of Cu-Ti binary system intermetallic compounds in Ag-Cu-Ti and Cu-Ni-Ti active filler metals. En: Ceramics International. 2017. vol. 43, no. 10, p. 7751-7761 YAO, X., SUN, Q. Y., XIAO, L. y SUN, J. Effect of Ti2Cu precipitates on mechanical behavior of Ti-2.5Cu alloy subjected to different heat treatments. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2009. vol. 484, no. 1-2, p. 196-202 YUAN, B., ZHANG, X. P., CHUNG, C. Y. y ZHU, M. The effect of porosity on phase transformation behavior of porous Ti-50.8 at.% Ni shape memory alloys prepared by capsule-free hot isostatic pressing. En: Materials Science and Engineering A. 2006. vol. 438-440, no. SPEC. ISS., p. 585-588 ZHANG, Erlin, LI, Shengyi, REN, Jing, ZHANG, Lan y HAN, Yong. Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys. En: Materials Science and Engineering: C. 2016. vol. 69, p. 760-768 ZHU, Y.D., YAN, M.F., ZHANG, Y.X. y ZHANG, C.S. First-principles investigation of structural, mechanical and electronic properties for Cu–Ti intermetallics. En: Computational Materials Science. 2016. vol. 123, p. 70-78 |
| dc.rights.none.fl_str_mv |
Copyright (c) 2019 Universidad Pedagógica y Tecnológica de Colombia Atribución-NoComercial-SinDerivadas 2.5 Colombia http://creativecommons.org/licenses/by-nc-nd/2.5/co/ info:eu-repo/semantics/openAccess http://purl.org/coar/access_right/c_abf2 |
| rights_invalid_str_mv |
Copyright (c) 2019 Universidad Pedagógica y Tecnológica de Colombia Atribución-NoComercial-SinDerivadas 2.5 Colombia http://creativecommons.org/licenses/by-nc-nd/2.5/co/ http://purl.org/coar/access_right/c_abf2 |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
1 recurso en línea (155 páginas) : ilustraciones, tablas, figuras. application/pdf application/pdf application/pdf |
| dc.publisher.none.fl_str_mv |
Universidad Pedagógica y Tecnológica de Colombia Facultad Ingeniería Tunja Maestría en Metalurgia y Ciencias de los Materiales |
| publisher.none.fl_str_mv |
Universidad Pedagógica y Tecnológica de Colombia Facultad Ingeniería Tunja Maestría en Metalurgia y Ciencias de los Materiales |
| dc.source.none.fl_str_mv |
reponame:RiUPTC: Repositorio Institucional UPTC instname:Universidad Pedagógica y Tecnológica de Colombia instacron:Universidad Pedagógica y Tecnológica de Colombia |
| instname_str |
Universidad Pedagógica y Tecnológica de Colombia |
| instacron_str |
Universidad Pedagógica y Tecnológica de Colombia |
| institution |
Universidad Pedagógica y Tecnológica de Colombia |
| reponame_str |
RiUPTC: Repositorio Institucional UPTC |
| collection |
RiUPTC: Repositorio Institucional UPTC |
| _version_ |
1841545974448652288 |
| spelling |
Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormalBohórquez Moreno, Cristian DanielCompuestos metálicosMateriales compuestosResistencia de materialesSinterizaciónMetalurgia de polvosCiencia de los materialesMaestría en Metalurgia y Ciencia de los Materiales - Tesis y disertaciones académicasSpa: En esta investigación se evaluó el comportamiento del cobre con adiciones de partículas de titanio y carburo de titanio, con fracciones en masa de titanio de 10%, 15% y 20% con el propósito de caracterizar la respuesta del MMC, manteniendo un porcentaje de agregado cerámico de carburo de titanio del 1%, debido a que este valor se ha determinado como el apropiado para este tipo de materiales compuestos 7 . Mediante el empleo de la ruta pulvimetalúrgia como técnica de conformado de MMC sinterizados por medio de descarga luminiscente anormal, por ser un proceso novedoso frente a los medios convencionales de sinterización como hornos o muflas, debido al aprovechamiento de las densidades energéticas que ofrece esta técnica 8,9 (bajos consumos de energía) y amigable con el medio ambiente debido a las emisión de especies neutras al medio ambiente, todo ello con el propósito de ampliar el espectro de científico y técnico en el área de este tipo de materiales.MaestríaMagister en Metalurgia y Ciencia de los MaterialesUniversidad Pedagógica y Tecnológica de ColombiaFacultad IngenieríaTunjaMaestría en Metalurgia y Ciencias de los MaterialesPérez Velásquez, Sandra PatriciaMendoza Oliveros, Martín Emilio2021-08-30T14:32:55Z2021-08-30T14:32:55Z2019Trabajo de grado - Maestríahttp://purl.org/coar/resource_type/c_bdcchttp://purl.org/coar/resource_type/c_18cfinfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/publishedVersionTexthttps://purl.org/redcol/resource_type/TMhttp://purl.org/coar/version/c_970fb48d4fbd8a851 recurso en línea (155 páginas) : ilustraciones, tablas, figuras.application/pdfapplication/pdfapplication/pdfBohórquez Moreno, C. D. (2019). Síntesis y caracterización de un MMC cobre-titanio-carburo de titanio sinterizado por descarga luminiscente anormal. (Tesis de maestría). Universidad Pedagógica y Tecnológica de Colombia, Tunja. http://repositorio.uptc.edu.co/handle/001/3698http://repositorio.uptc.edu.co/handle/001/3698spaAKBARPOUR, M. R. y JAVADHESARI, S. Moniri. Wear performance of novel nanostructured Ti-Cu intermetallic alloy as a potential material for biomedical applications. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 699, p. I-AKBARPOUR, Mohammad Reza y HESARI, Feridoun Alikhani. Characterization and hardness of TiCu–Ti2Cu3 intermetallic material fabricated by mechanical alloying and subsequent annealing. En: Materials Research Express. 2016. vol. 3, no. 4, p. 45004-45004ALANEME, Kenneth Kanayo y ODONI, Benjamin Ufuoma. Mechanical properties, wear and corrosion behavior of copper matrix composites reinforced with steel machining chips. 2016AMERICAN SOCIETY FOR, Testing y MATERIALS. Astm B962-13 Standard test methods for density of compacted or sintered powder metallurgy (PM) products using archimedes’ Principle. En: 2013. vol. 2, p. 1-7AMERICAN SOCIETY FOR, Testing y MATERIALS. Standard Test Method for Microindentation Hardness of Powder Metallurgy ( P / M ). 2005, p. 14-16BAGHERI, Gh A. The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles. 2016BARSOUKOV, E. y MACDONALD, J.R. Impedance Spectroscopy: Theory, Experiment, and Applications. Wiley, 2005. 9780471716228.BUYTOZ, Soner, DAGDELEN, Fethi, ISLAK, Serkan, KOK, Mediha, KIR, Durmus y ERCAN, Ercan. Effect of the TiC content on microstructure and thermal properties of Cu-TiC composites prepared by powder metallurgy. En: Journal of Thermal Analysis and Calorimetry. 2014, p. 1277-1283CAI, Qingshan, LIU, Wensheng, MA, Yunzhu, ZHU, Wentan y PANG, Xinkuan. Effect of joining temperature on the microstructure and strength of W–steel HIP joints with Ti/Cu composite interlayer. En: Journal of Nuclear Materials. 2018. vol. 507, p. 198-207.CANALE, P. y SERVANT, C. Thermodynamic Assessment of the Cu–Ti System Taking into Account the New Stable Phase CuTi3. En: Zeitschrift für Metallkunde. 2002. vol. 93, no. 4, p. 273-276.CHAPMAN, B. Glow Discharge Processes: Sputtering and Plasma Etching. Wiley, 1980. 9780471078289.CHEN, Feifan, WANG, Wei, WANG, Kang, HO, Pofeng, LI, Han, HUANG, Xi y CHEN, Weijie. Influence of post-weld heat treatment on microstructure and adhesion of Ti/Cu composite. En: Materials Science and Technology (United Kingdom). 2018. vol. 34, no. 12, p. 1441-1446.CHEN, Q., LI, D. Y. y COOK, Bruce. Is porosity always detrimental to the wear resistance of materials?-A computational study on the effect of porosity on erosive wear of TiC/Cu composites. En: Wear. 2009. vol. 267, no. 5-8, p. 1153-1159CHUISTOV, K. V. Copper–Titanium Solid Solutions are a New Generation of High Strength Age-Hardening Alloys. En: Uspehi Fiziki Metallov. 2005. vol. 6, no. 1, p. 55- 103CHUNG, Chih Yu, LEE, Mu Tse, TSAI, Min Yen, CHU, Chao Hung y LIN, Su Jien. High thermal conductive diamond/Cu-Ti composites fabricated by pressureless sintering technique. En: Applied Thermal Engineering. 2014. vol. 69, no. 1-2, p. 208- 213COPPER DEVELOPMENT ASSOCIATION, Inc. Copper powder consolidation techniques. Compaction, Solid state sintering, liquid phase sintering, 2017.DINAHARAN, Issac, SATHISKUMAR, Ramasamy y MURUGAN, Nadarajan. Effect of ceramic particulate type on microstructure and properties of copper matrix composites synthesized by friction stir processing. 2016FRIDMAN, Alexander. Plasma Chemistry. Cambridge: Cambridge University Press, 2008. 9780521847353.GAO, Xin, YUE, Hongyan, GUO, Erjun, ZHANG, Shaolin, YAO, Longhui, LIN, Xuanyu, WANG, Bao y GUAN, Enhao. Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets. En: Journal of Materials Science & Technology. 2018. vol. 34, no. 10, p. 1925-1931GERMAN, R. M. y PARK, S. J. Handbook of Mathematical Relations in Particulate Materials Processing: Ceramics, Powder Metals, Cermets, Carbides, Hard Materials, and Minerals. Wiley, 2009. (Wiley Series on Processing of Engineering Materials). 9780470368725.GERMAN, Randall M. Particulate composites: Fundamentals and applications. Wiley Series on Processing of Engineering Materials, 2016. 1-436 p. 9783319299174GÓMEZ TURRIÓN, Sergio. Materiales compuestos con propiedades a la carta. Diseño de interfases. 2008, p. 337-337GRANTA DESIGN, Cambridge U. K. Propiedades materiales. 2013)GUO, Chun, ZHOU, Jiansong, YU, Youjun, WANG, Lingqian, ZHOU, Huidi y CHEN, Jianmin. Microstructure and tribological properties of Ti-Cu intermetallic compound coating. En: Materials and Design. 2012. vol. 36, p. 482-489HERNANDEZ-SANTIAGO, Felipe, LOPEZ-HIRATA, Victor M., HERNANDEZ DURAN, Pamela E., SAUCEDO-MUÑOZ, Maribel L. y AVILA-DAVILA, Erika O. Analysis of β´ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion Couple Methods. 2017, p. 783-789.HOLLAND, Lawrence Rozier. Physical properties of titanium. III. the specific heat. En: Journal of Applied Physics. 1963. vol. 34, p. 2350-2357ICSG. International copper study group.IGHARO, M. y WOOD, J. V. Compaction and Sintering Phenomena in Titanium Nickel Shape Memory Alloys. En: Powder Metallurgy. 1985. vol. 28, no. 3, p. 131- 139INSTITUTO EUROPEO DEL, cobre. Casi un tercio del cobre que se utiliza cada año en todo el mundo proviene del reciclaje. 2017).INTERNATIONAL, A. S. M. Powder Metallurgy. 2005.INTERNATIONAL, A. S. M. y HANDBOOK, Committee. ASM handbook. Volume 3, Volume 3. Materials Park, Ohio: ASM International, 1992. 0871703815 9780871703811.KANG, Suk-Joong L. SINTERING:Densification, Grain Growth&Microstructure. En: Sintering. 2005, p. 1-261KARAKULAK, Erdem. Characterization of Cu–Ti powder metallurgical materials. En: International Journal of Minerals, Metallurgy, and Materials. 2017. vol. 24, no. 1, p. 83-90KLEIN, A. N., CARDOSO, R. P., PAVANATI, H. C., BINDER, C., MALISKA, A. M., HAMMES, G., FUSAO, D., SEEBER, A., BRUNATTO, S. F. y MUZART, J. L. R. DC plasma technology applied to powder metallurgy: An overview. En: Plasma Science and Technology. 2013. vol. 15, no. 1, p. 70-81KUMAR, Sanjeev, SAINI, Deepak, LOTEY, Gurmeet Singh y VERMA, N. K. Electrochemical synthesis of copper nanowires in anodic alumina membrane and their impedance analysis. En: Superlattices and Microstructures. 2011. vol. 50, no. 6, p. 698-702KUNDU, S., GHOSH, M., LAIK, A., BHANUMURTHY, K., KALE, G. B. y CHATTERJEE, S. Diffusion bonding of commercially pure titanium to 304 stainlesssteel using copper interlayer. En: Materials Science and Engineering A. 2005. vol. 407, no. 1-2, p. 154-160KUNDU, Sukumar, CHAKRABORTY, Asmita y MISHRA, Brajendra. Interfacial reaction and microstructure study of DSS/Cu/Ti64 diffusion-welded couple. En: Welding in the World. 2018. vol. 62, no. 1, p. 155-167LAIK, Arijit, BHANUMURTHY, Karanam, KALE, Gajanan Balaji y KASHYAP, Bhagwati Prasad. Diffusion characteristics in the Cu-Ti system. En: International Journal of Materials Research. 2012. vol. 103, no. 6, p. 661-672LAUGHLIN, David E. y CAHN, John W. Spinodal decomposition in age hardening copper-titanium alloys. En: Acta Metallurgica. 1975/03/01/, 1975. vol. 23, no. 3, p. 329-339LENG, Y. Materials Characterization: Introduction to Microscopic and Spectroscopic Methods. Wiley, 2009. 9780470822999.LI, Jianwei, ZHANG, Hailong, WANG, Luhua, CHE, Zifan, ZHANG, Yang, WANG, Jinguo, KIM, Moon J. y WANG, Xitao. Optimized thermal properties in diamond particles reinforced copper-titanium matrix composites produced by gas pressure infiltration. En: Composites Part A: Applied Science and Manufacturing. 2016. vol. 91, p. 189-194LI, Xinmin y OLOFSSON, Ulf. A study on friction and wear reduction due to porosity in powder metallurgic gear materials. En: Tribology International. 2017. vol. 110, no. May 2016, p. 86-95LIANG, Yunhong, HAN, Zhiwu, LI, Xiujuan, ZHANG, Zhihui y REN, Luquan. Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu-Ti-C system. En: Materials Chemistry and Physics. 2012. vol. 137, no. 1, p. 200-206LIU, Jia, WANG, Xian hui, RAN, Qian ni, ZHAO, Gang y ZHU, Xiu xiu. Microstructure and properties of Cu–3Ti–1Ni alloy with aging process. En: Transactions of Nonferrous Metals Society of China (English Edition). 2016. vol. 26, no. 12, p. 3183- 3188LIU, Zhilong, PATZIG, Christian, SELLE, Susanne, HÖCHE, Thomas, GUMBSCH, Peter y GREINER, Christian. Stages in the tribologically-induced oxidation of high purity copper. En: Scripta Materialia. 2018. vol. 153, p. 114-117LIU, Zhiqiang, JI, Feifei, WANG, Mingqiang y ZHU, Tianyu. Study on the Tribological Properties of Porous Titanium Sliding against Tungsten Carbide YG6. En: Metals. 2017. vol. 7, no. 1, p. 28-28LU, Jianbang, SHU, Shili, QIU, Feng, WANG, Yawei y JIANG, Qichuan. Compression properties and abrasive wear behavior of high volume fraction TiC x – TiB 2 /Cu composites fabricated by combustion synthesis and hot press consolidation. En: JOURNAL OF MATERIALS&DESIGN. 2012. vol. 40, p. 157-162LUAÑA, Víctor y RECIO, José Manuel. Espectroscopía molecular, 2002MARK, Brininstool. Copper statistics, mineral commodity summaries. En: U.S. Geological Survey. 2015, no. 703, p. 2014-2015MATERIALS, American Society For Testing. Standard Test Method for Wear Testing with a Pin-on-Disk. vol. v, p. 1-5MENEZES, Pradeep L., NOSONOVSKY, Michael, INGOLE, Sudeep Prabhakar, KAILAS, Satish V. y LOVELL, Michael R. Tribology for scientists and engineers : from basics to advanced concepts. 2013 ed: Springer-Verlag New York, 2013. 9781461419457.MOGHANIAN, Amirhossein, SHARIFIANJAZI, Fariborz, ABACHI, Parvin, SADEGHI, Ehsan, JAFARIKHORAMI, Hassan y SEDGHI, Arman. Production and properties of Cu/TiO2 nano-composites. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 698, p. 518-524MORARU, Corina Gabriela, POP, Mihai Alin y BEDO, Tibor. Problems encountered with microwave sintering of copper based metal matrix composites. 2013. vol. 2013, no. 65, p. 18-23MORARU, Corina Gabriela, POP, Mihai Alin, BEDO, Tibor y ERBAN, Cornel Eugen Ș. Spark plasma sintering of novel copper based metal matrix composites. 2013. vol. 2013, no. 65MUNIR, Z. A., ANSELMI-TAMBURINI, U. y OHYANAGI, M. The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. En: Journal of Materials Science. February 01, 2006. vol. 41, no. 3, p. 763-777NAGARJUNA, S., BALASUBRAMANIAN, K. y SARMA, D. S. Effect of Ti additions on the electrical resistivity of copper. En: Materials Science and Engineering A. 1997. vol. 225, p. 118-124NAYAK, D. y DEBATA, M. Effect of composition and milling time on mechanical and wear performance of copper?graphite composites processed by powder metallurgy route. En: Powder Metallurgy. 2013. vol. 000, no. 000, p. 1-9NAYAN, Niraj, SHUKLA, Anoop K., CHANDRAN, Prathap, BAKSHI, Srinivasa Rao, MURTY, S. V. S. N., PANT, Bhanu y VENKITAKRISHNAN, P. V. Processing and characterization of spark plasma sintered copper/carbon nanotube composites. En: Materials Science and Engineering: A. 2016. vol. 682, no. November 2016, p. 229- 237NEMATI, N., KHOSROSHAHI, R., EMAMY, M. y ZOLRIASATEIN, A. Investigation of microstructure, hardness and wear properties of Al–4.5wt.% Cu–TiC nanocomposites produced by mechanical milling. En: Materials & Design. 2011. vol. 32, no. 7, p. 3718-3729OMORI, Mamoru. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS). En: Materials Science and Engineering: A. 2000/08/15/, 2000. vol. 287, no. 2, p. 183-188PÉREZ-VELÁSQUEZ, Sandra, PINEDA-TRIANA, Yaneth, AGUILAR-CASTRO, Yesid y VERA-LÓPEZ, Enrique. Efecto del porcentaje de refuerzo frente al desgaste en compuestos de matriz metálica sinterizados con descarga luminiscente anormal. En: Revista de Metalurgia. 2016. vol. 52, no. 1, p. e059-e059PINA, V. Guiñon, AMIGÓ, V. y MUÑOZ, A. Igual. Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys. En: Corrosion Science. 2016. vol. 109, p. 115-125RABINOWICZ, E. Friction and Wear of Materials. Second edi ed1995.RAJKUMAR, K. y ARAVINDAN, S. Tribological performance of microwave sintered copperTiCgraphite hybrid composites. En: Tribology International. 2011. vol. 44, no. 4, p. 347-358ROSENBOHM, Jaeger y FONTEYNE, R. The Exact Measurement of the Specific Heats of Metals at High Temperatures. XXIII. The Calorimetrical, Electrical and Thermoelectrical Behaviour of Ductile Titanium. I. 1936. vol. 515, p. 442-452RUŽI, J., STAŠI, J., RAJKOVI, V. y BOŽI, D. Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys. En: Materials and Design. 2013. vol. 49, p. 746-754SABBAGHIAN, M., SHAMANIAN, M., AKRAMIFARD, H. R. y ESMAILZADEH, M. Effect of friction stir processing on the microstructure and mechanical properties of Cu-TiC composite. En: Ceramics International. 2014. vol. 40, no. 8 PART B, p. 12969-12976SANTOS, Armando Sarmiento, ARTURO, Carlos y VARGAS, Parra. Aplicación de la descarga luminiscente anormal como una fuente calórica Applying anormal glow discharge as a caloric source. 2017. vol. 8, p. 25-29SARMIENTO-SANTOS, Armando, ROJAS-SÁNCHEZ, César Enrique y CEPEDA GRIMALDOS, José Fernando. Comportamiento de la descarga luminiscente anormal dependiendo de la atmósfera gaseosa en un sistema apto para tratamiento de materiales. En: Respuestas; Vol. 18, Núm. 1 (2013) DO - 10.22463/0122820X.371. 06/15/, 2013SARMIENTO-SANTOS, Armando. Comportamiento de la descarga luminiscente anormal dependiendo de la atmósfera gaseosa en un sistema apto para tratamiento de materiales. 2013. vol. 18SATHISKUMAR, R., MURUGAN, N., DINAHARAN, I. y VIJAY, S. J. Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing. En: Materials Characterization. 2013. vol. 84, p. 16-27SEMBOSHI, Satoshi, ORIMO, Shin-ichi, SUDA, Hisashi, GAO, Weilin y SUGAWARA, Akira. Aging of Copper-Titanium Dilute Alloys in Hydrogen Atmosphere: Influence of Prior-Deformation on Strength and Electrical Conductivity. En: Materials Transactions. 2011. vol. 52, no. 12, p. 2137-2142SINGH, Manvandra Kumar y GAUTAM, Rakesh Kumar. Mechanical and tribological properties of plastically deformed copper metal matrix nano composite. En: Materials Today: Proceedings. 2018. vol. 5, p. 5727-5736SMITH, W. F. y HASHEMI, J. Fundamentos de la ciencia e ingeniería de materiales. McGraw-Hill, 2006. 9789701056387.SOFFA, W. A. y LAUGHLIN, D. E. High-strength age hardening copper–titanium alloys: redivivus. En: Progress in Materials Science. 2004/01/01/, 2004. vol. 49, no. 3, p. 347-366SZWED, B. y KONIECZNY, M. Influence of diffusion bonding parameters on the structure and properties of titanium and stainless steel joints with copper interlayer. En: Journal of Achievements in Materials and Manufacturing Engineering. 2014. vol. 67, no. 1, p. 21-25THANKACHAN, Titus y PRAKASH, K. Soorya. Microstructural, mechanical and tribological behavior of aluminum nitride reinforced copper surface composites fabricated through friction stir processing route. En: Materials Science and Engineering: A. 2017. vol. 688, p. 301-308TOSUN, Gul, KILIC, Musa, OZLER, Latif y TOSUN, Nihat. Characterization of a porous Nickel-Titanium alloy produced with self-propagating high-temperature synthesis. En: Materiali in Tehnologije. 2018. vol. 52, no. 4, p. 435-442TUNAY, Recai Fatih y KURBANOǦLU, Cahit. Investigation of the tribological properties of Cu-based porous bearings. En: Industrial Lubrication and Tribology. 2012. vol. 64, no. 2, p. 111-119UZUNOV, Tz D., LAMBOV, S. I. y STOJANOV, St P. Kinetics of solid-phase interactions in thin-film Cu/Ti system with an excess of Cu. En: Vacuum. 1996. vol. 47, no. 1, p. 61-65UZUNOV, Tz D., LAMBOV, S. I. y STOJANOV, St P. Kinetics of solid-phase interactions in thin-film Cu/Ti system with an excess of Ti. En: Vacuum. 1996. vol. 47, no. 1, p. 61-65VENKATESWARAN, K., KAMARAJ, M. y RAO, K. Prasad. Dry sliding wear of a powder metallurgy copper-based metal matrix composite reinforced with iron aluminide intermetallic particles. En: Journal of Composite Materials. 2007. vol. 41, no. 14, p. 1713-1728VILLAIN, S., DESVALS, M. A., CLUGNET, G. y KNAUTH, P. CuBr by impedance spectroscopy. En: Solid State Ionics. 1996. vol. 83, no. 3, p. 191-198WANG, C. P., LUO, Y. S., LU, Y., HAN, J. J., SHI, Z., GUO, Y. H. y LIU, X. J. Interdiffusion and Atomic Mobilities in bcc Ti-Ga and Ti-Cu Alloys. En: Journal of Phase Equilibria and Diffusion. 2017. vol. 38, no. 2, p. 84-93WANG, Fenglin, LI, Yunping, WAKOH, Kimio, KOIZUMI, Yuichiro y CHIBA, Akihiko. Cu-Ti-C alloy with high strength and high electrical conductivity prepared by two step ball-milling processes. En: Materials and Design. 2014. vol. 61, p. 70-74WANG, Fenglin, LI, Yunping, WANG, Xiaoyu, KOIZUMI, Yuichiro, KENTA, Yamanaka y CHIBA, Akihiko. In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2016. vol. 657, p. 122-132WANG, Fenglin, LI, Yunping, XIE, Guoqiang, WAKOH, Kimio, YAMANAKA, Kenta, KOIZUMI, Yuichiro y CHIBA, Akihiko. Investigation on hot deformation behavior of nanoscale TiC-strengthened Cu alloys fabricated by mechanical milling. En: Materials Science and Engineering A. 2016. vol. 668, p. 1-12WANG, Fenglin, LI, Yunping, YAMANAKA, Kenta, WAKON, Kimio, HARATA, Koichi y CHIBA, Akihiko. Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys. En: Materials and Design. 2014. vol. 64, p. 441-449WANG, Xianlong, DING, Haimin, QI, Fugong, LIU, Qing, FAN, Xiaoliang y SHI, Yu. Mechanism of in situ synthesis of TiC in Cu melts and its microstructures. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2017. vol. 695, p. 3410-3418XIAO, Yelong, YAO, Pingping, ZHOU, Haibin, ZHANG, Zhongyi, GONG, Taimin, ZHAO, Lin, ZUO, Xiaoting, DENG, Minwen y JIN, Zongxiang. Friction and wear behavior of copper matrix composite for spacecraft rendezvous and docking under different conditions. En: Wear. 2014. vol. 320, no. 1, p. 127-134YAN, M. F., ZHU, Y. D., ZHANG, C. S., ZHANG, Y. X., WANG, Y. X. y YANG, L. Microstructure and mechanical properties of copper-titanium-nitrogen multiphase layers produced by a duplex treatment on C17200 copper-beryllium alloy. En: Materials and Design. 2015. vol. 84, p. 10-17YANG, Jian, HUANG, Jihua, YE, Zheng, FAN, Dongyu, CHEN, Shuhai y ZHAO, Yue. First-principles calculations on structural energetics of Cu-Ti binary system intermetallic compounds in Ag-Cu-Ti and Cu-Ni-Ti active filler metals. En: Ceramics International. 2017. vol. 43, no. 10, p. 7751-7761YAO, X., SUN, Q. Y., XIAO, L. y SUN, J. Effect of Ti2Cu precipitates on mechanical behavior of Ti-2.5Cu alloy subjected to different heat treatments. En: JOURNAL OF ALLOYS AND COMPOUNDS. 2009. vol. 484, no. 1-2, p. 196-202YUAN, B., ZHANG, X. P., CHUNG, C. Y. y ZHU, M. The effect of porosity on phase transformation behavior of porous Ti-50.8 at.% Ni shape memory alloys prepared by capsule-free hot isostatic pressing. En: Materials Science and Engineering A. 2006. vol. 438-440, no. SPEC. ISS., p. 585-588ZHANG, Erlin, LI, Shengyi, REN, Jing, ZHANG, Lan y HAN, Yong. Effect of extrusion processing on the microstructure, mechanical properties, biocorrosion properties and antibacterial properties of Ti-Cu sintered alloys. En: Materials Science and Engineering: C. 2016. vol. 69, p. 760-768ZHU, Y.D., YAN, M.F., ZHANG, Y.X. y ZHANG, C.S. First-principles investigation of structural, mechanical and electronic properties for Cu–Ti intermetallics. En: Computational Materials Science. 2016. vol. 123, p. 70-78Copyright (c) 2019 Universidad Pedagógica y Tecnológica de ColombiaAtribución-NoComercial-SinDerivadas 2.5 Colombiahttp://creativecommons.org/licenses/by-nc-nd/2.5/co/info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2reponame:RiUPTC: Repositorio Institucional UPTCinstname:Universidad Pedagógica y Tecnológica de Colombiainstacron:Universidad Pedagógica y Tecnológica de Colombia2025-04-24T23:07:54Z |