Evaluación del desempeño a nivel de laboratorio de un lodo de perforación polimérico base agua mediante la adición de dos nano-aditivos para el control de filtrado y daño de formación en la zona productora de la formación mugrosa en la Cuenca del Valle Medio del Magdalena

This project was intended to evaluate the laboratory-level performance of a water-based polymeric drilling fluid by adding two nano-additives for filter control and formation damage in the production zonen of the Mugrosa in VMM. In which silica and graphite nanoparticles were analyzed at concentrations of 1 PPM and 2 PPM, through basic physical tests (density, API rheology, filtration API, solids control, lubricity), chemistry (pH, alkalinity and chlorides) and special physics ( filtration HPHT , HPHT rheology, filtration PPT and dynamic filtration), where it is noted that the latter were only performed to the based mud and nanofluids that had a better performance in the basic tests. In addition, the mud was subjected to a dynamic aging process (16 hr) to simulate the actual conditions of the reservoir.

• Fecha de publicación: 2021
• Institución: Universidad de América
• Repositorio: Lumieres
• Idioma: spa
• OAI Identifier: oai:repository.uamerica.edu.co:20.500.11839/8263
• Acceso en línea: https://hdl.handle.net/20.500.11839/8263
• Palabra clave: Daño formación; Fluido perforación; Nanopartículas; Formation damage; Drilling fluid; Nanoparticles; Tesis y disertaciones académicas
• License: Atribución – No comercial