Caracterización de la fibra polimérica para reforzar concreto "Polifibra" de Polyaltec LTDA.
In this project a mechanical characterization of the polymer fiber to reinforce POLYALTEC LTDA concrete was carried out, which began with the evaluation of the current state of concrete reinforced with fibers. A concrete mix design of 210 kg / 〖cm〗 ^ 3 (21 MPa), composed of ¾ inch gravel, Tolima qua...
- Autores:
- Tipo de recurso:
- Fecha de publicación:
- 2017
- Institución:
- Universidad de América
- Repositorio:
- Lumieres
- Idioma:
- spa
- OAI Identifier:
- oai:repository.uamerica.edu.co:20.500.11839/6256
- Acceso en línea:
- https://hdl.handle.net/20.500.11839/6256
- Palabra clave:
- Concretos reforzados
Fibras para refuerzo
Reinforced concretes
Reinforcement fibers
Tesis y disertaciones académicas
- Rights
- License
- Atribución – No comercial – Compartir igual
| Summary: | In this project a mechanical characterization of the polymer fiber to reinforce POLYALTEC LTDA concrete was carried out, which began with the evaluation of the current state of concrete reinforced with fibers. A concrete mix design of 210 kg / 〖cm〗 ^ 3 (21 MPa), composed of ¾ inch gravel, Tolima quarry black sand and Tequendama type cement, which is used for foundations, Plates or Slabs, Columns, Walls, Channels, Tanks and Floors (light traffic). A tensile strength test was performed on the "polyfiber" to characterize the material that will be used as concrete reinforcement. Finally, a comparison was made of the manufacturing cost of a concrete with welded mesh, with reinforced concrete with "poly fiber" to identify the lowest manufacturing cost between the two reinforced concretes. |
|---|