Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento

Exergy load distribution method is presented as a new way of calculating the overall performance of a process. This method allows relating, in a single mathematical function, the local efficiencies of a process, the thermodynamics irreversibilities of each unit operation and the primary and transfor...

Full description

Autores:
Tipo de recurso:
Fecha de publicación:
2018
Institución:
Universidad de América
Repositorio:
Lumieres
Idioma:
spa
OAI Identifier:
oai:repository.uamerica.edu.co:20.500.11839/7732
Acceso en línea:
https://hdl.handle.net/20.500.11839/7732
Palabra clave:
Ciclo combinado
Distribución de cargas de exergía
Exergía primaria
Exergía transformada
Combined cycle
Loas distribution exergy
Primary exergy
Transformed exergy
Rights
License
Atribución – No comercial – Sin Derivar
id Lumieres_2135ef16ead690c0f83d67ae61b0d5f7
oai_identifier_str oai:repository.uamerica.edu.co:20.500.11839/7732
network_acronym_str Lumieres
network_name_str Lumieres
repository_id_str
spelling Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamientoExergy load distribution method applied to a combined regenerative and reheating power cycle plantCiclo combinadoDistribución de cargas de exergíaExergía primariaExergía transformadaCombined cycleLoas distribution exergyPrimary exergyTransformed exergyExergy load distribution method is presented as a new way of calculating the overall performance of a process. This method allows relating, in a single mathematical function, the local efficiencies of a process, the thermodynamics irreversibilities of each unit operation and the primary and transformed exergy consumption. Due to in the last years the Colombian power sector has been taking importance in the country’s economic structure, a combined regenerative and reheating cycle power plant with energy capacity of 420MW has been modeled by Aspen Hyprotech Systems® V8.6 (HYSYS® V8.6) to illustrate the applicability of this method. The HYSYS´s spread sheet is used to evaluate the parameters involved in the exergy analysis. After this analysis, the load distribution method is carried out, where it is identified three primary exergy loads and one transformed exergy load in the process gas turbine. Likewise, it is identified eleven primary exergy loads and seven transformed exergy loads in the steam cycle. According to this, it is observed that the overall efficiency of gas turbine is 1.51 %, and the overall efficiency of the steam cycle is 72.05 %. It is also known that the units in which thereEl análisis de distribución de cargas de exergía se presenta como un método de cálculo que permite relacionar en una sola función las eficiencias locales de un proceso, las irreversibilidades termodinámicas de cada operación y el consumo de la exergía primaria y transformada del proceso. Para ilustrar la aplicabilidad de este método y considerando que en los últimos años el sector eléctrico colombiano ha tomado importancia en la estructura económica del país, se realiza un modelamiento de un ciclo de potencia combinado regenerativo y con recalentamiento con capacidad de 420MW mediante el software Aspen HyprotechSystems® V8.6 (HYSYS® V8.6), el cual permite conocer las propiedades termodinámicas involucradas en el ciclo de potencia. Se calcula, a partir de la spreadsheet de HYSYS, la exergía de flujo de cada corriente del proceso, teniendo en cuenta la exergía química de la turbina de gas del proceso. Una vez calculadas las exergías de flujo, se realiza el método de distribución de cargas de exergía, en el que se establece que hay tres cargas de exergía primaria y dos cargas de exergía transformada en el ciclo de gas del proceso. Asimismo, se identifica que hay diez cargas de exergía primaria y seis cargas de exergía transformada en el ciclo de vapor del proceso. A partir de esto se observa que la eficiencia global de la turbina de gas es 1.51 %, y la del ciclo de vapor, 72.05 %. Se conoce, además, que las unidades en las que hay una mayor carga de exergía primaria son la cámara de combustión y la turbina tres del ciclo de vapor.Ediciones Universidad de América2020-02-21T21:07:50Z2020-02-21T21:07:50Z2018-12Articlehttp://purl.org/coar/resource_type/c_6501application/pdfAPA 6th - Fernández Ramírez, J. S. (2018) Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento. Semilleros: Formación Investigativa. 4(1), 15-28 Retrieved from http://hdl.handle.net/20.500.11839/77322619-5267https://hdl.handle.net/20.500.11839/7732Atribución – No comercial – Sin Derivarhttp://purl.org/coar/access_right/c_abf2spaFernández Ramírez, Juan Sebastiánoai:repository.uamerica.edu.co:20.500.11839/77322025-02-01T09:18:48Z
dc.title.none.fl_str_mv Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
Exergy load distribution method applied to a combined regenerative and reheating power cycle plant
title Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
spellingShingle Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
Ciclo combinado
Distribución de cargas de exergía
Exergía primaria
Exergía transformada
Combined cycle
Loas distribution exergy
Primary exergy
Transformed exergy
title_short Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
title_full Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
title_fullStr Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
title_full_unstemmed Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
title_sort Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento
dc.subject.none.fl_str_mv Ciclo combinado
Distribución de cargas de exergía
Exergía primaria
Exergía transformada
Combined cycle
Loas distribution exergy
Primary exergy
Transformed exergy
topic Ciclo combinado
Distribución de cargas de exergía
Exergía primaria
Exergía transformada
Combined cycle
Loas distribution exergy
Primary exergy
Transformed exergy
description Exergy load distribution method is presented as a new way of calculating the overall performance of a process. This method allows relating, in a single mathematical function, the local efficiencies of a process, the thermodynamics irreversibilities of each unit operation and the primary and transformed exergy consumption. Due to in the last years the Colombian power sector has been taking importance in the country’s economic structure, a combined regenerative and reheating cycle power plant with energy capacity of 420MW has been modeled by Aspen Hyprotech Systems® V8.6 (HYSYS® V8.6) to illustrate the applicability of this method. The HYSYS´s spread sheet is used to evaluate the parameters involved in the exergy analysis. After this analysis, the load distribution method is carried out, where it is identified three primary exergy loads and one transformed exergy load in the process gas turbine. Likewise, it is identified eleven primary exergy loads and seven transformed exergy loads in the steam cycle. According to this, it is observed that the overall efficiency of gas turbine is 1.51 %, and the overall efficiency of the steam cycle is 72.05 %. It is also known that the units in which there
publishDate 2018
dc.date.none.fl_str_mv 2018-12
2020-02-21T21:07:50Z
2020-02-21T21:07:50Z
dc.type.none.fl_str_mv Article
dc.type.coar.fl_str_mv http://purl.org/coar/resource_type/c_6501
dc.identifier.none.fl_str_mv APA 6th - Fernández Ramírez, J. S. (2018) Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento. Semilleros: Formación Investigativa. 4(1), 15-28 Retrieved from http://hdl.handle.net/20.500.11839/7732
2619-5267
https://hdl.handle.net/20.500.11839/7732
identifier_str_mv APA 6th - Fernández Ramírez, J. S. (2018) Análisis por distribución de cargas de exergía a un ciclo combinado regenerativo y con recalentamiento. Semilleros: Formación Investigativa. 4(1), 15-28 Retrieved from http://hdl.handle.net/20.500.11839/7732
2619-5267
url https://hdl.handle.net/20.500.11839/7732
dc.language.iso.fl_str_mv spa
language spa
dc.rights.none.fl_str_mv Atribución – No comercial – Sin Derivar
http://purl.org/coar/access_right/c_abf2
rights_invalid_str_mv Atribución – No comercial – Sin Derivar
http://purl.org/coar/access_right/c_abf2
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Ediciones Universidad de América
publisher.none.fl_str_mv Ediciones Universidad de América
institution Universidad de América
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1841553093475434496