Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados.
La necesidad de materiales de construcción alternativos y el llamado a un medio ambiente más limpio, ha llevado al reúso de materiales, especialmente aquellos no biodegradables, tales como el vidrio y el plástico La eliminación de este material no biodegradable ha sido un gran desafío. En este traba...
- Autores:
-
Cardona Howard, Faber Sneider
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2020
- Institución:
- Universidad Cooperativa de Colombia
- Repositorio:
- Repositorio UCC
- Idioma:
- OAI Identifier:
- oai:repository.ucc.edu.co:20.500.12494/20277
- Acceso en línea:
- https://hdl.handle.net/20.500.12494/20277
- Palabra clave:
- Ladrillos
Resistencia a compresión
Agregados
PET
Factor de emisión
Dióxido de carbono
TG 2020 ICI 20277
bricks
compressive strength
fine aggregates
PET
emission factor
carbon dioxide.
- Rights
- openAccess
- License
- Atribución – No comercial – Sin Derivar
id |
COOPER2_c269e087f46e206ce4b9bc5fc0d55994 |
---|---|
oai_identifier_str |
oai:repository.ucc.edu.co:20.500.12494/20277 |
network_acronym_str |
COOPER2 |
network_name_str |
Repositorio UCC |
repository_id_str |
|
dc.title.spa.fl_str_mv |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
title |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
spellingShingle |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. Ladrillos Resistencia a compresión Agregados PET Factor de emisión Dióxido de carbono TG 2020 ICI 20277 bricks compressive strength fine aggregates PET emission factor carbon dioxide. |
title_short |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
title_full |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
title_fullStr |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
title_full_unstemmed |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
title_sort |
Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados. |
dc.creator.fl_str_mv |
Cardona Howard, Faber Sneider |
dc.contributor.advisor.none.fl_str_mv |
Arbeláez Pérez, Oscar Felipe |
dc.contributor.author.none.fl_str_mv |
Cardona Howard, Faber Sneider |
dc.subject.spa.fl_str_mv |
Ladrillos Resistencia a compresión Agregados PET Factor de emisión Dióxido de carbono |
topic |
Ladrillos Resistencia a compresión Agregados PET Factor de emisión Dióxido de carbono TG 2020 ICI 20277 bricks compressive strength fine aggregates PET emission factor carbon dioxide. |
dc.subject.classification.spa.fl_str_mv |
TG 2020 ICI 20277 |
dc.subject.other.spa.fl_str_mv |
bricks compressive strength fine aggregates PET emission factor carbon dioxide. |
description |
La necesidad de materiales de construcción alternativos y el llamado a un medio ambiente más limpio, ha llevado al reúso de materiales, especialmente aquellos no biodegradables, tales como el vidrio y el plástico La eliminación de este material no biodegradable ha sido un gran desafío. En este trabajo se prepararon mezclas de plástico, agregado fino y residuos de vidrio, en mezclas individuales y combinadas. A partir de las mezclas preparadas se elaboraron especímenes prismáticos de (0.124×0.07×0.100) m, los cuales se fundieron en un horno de convección hasta 240 °C por 3 horas y posterior enfriamiento por convección natural. Se evaluó la densidad y la resistencia a la compresión de los especímenes preparados. Los resultados experimentales mostraron un aumento en la densidad con el contenido de plástico y agregados, siendo ligeramente mayor en las muestras con mayor contenido de agregados. Asimismo, se observó un aumento en la resistencia a la compresión, siendo mayor para la muestra que contenía solo plástico y agregado, la cual mostró una mejora del 243% con respecto al material de referencia (preparada solo a partir de plástico). Asimismo, se encontró una disminución en la emisión del dióxido de carbono. Dado del potencial de las mezclas preparadas, se espera que los resultados encontrados permitan generar una ruta de gestión de residuos plásticos y vidrio. |
publishDate |
2020 |
dc.date.accessioned.none.fl_str_mv |
2020-09-23T17:00:09Z |
dc.date.available.none.fl_str_mv |
2020-09-23T17:00:09Z |
dc.date.issued.none.fl_str_mv |
2020-09-11 |
dc.type.none.fl_str_mv |
Trabajo de grado - Pregrado |
dc.type.coar.none.fl_str_mv |
http://purl.org/coar/resource_type/c_7a1f |
dc.type.driver.none.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
dc.type.version.none.fl_str_mv |
info:eu-repo/semantics/acceptedVersion |
format |
http://purl.org/coar/resource_type/c_7a1f |
status_str |
acceptedVersion |
dc.identifier.uri.none.fl_str_mv |
https://hdl.handle.net/20.500.12494/20277 |
dc.identifier.bibliographicCitation.spa.fl_str_mv |
Cardona Howard, F. S. (2020). Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados [Tesis de pregrado, Universidad Cooperativa de Colombia]. Repositorio Institucional UCC. http://hdl.handle.net/20.500.12494/20277 |
url |
https://hdl.handle.net/20.500.12494/20277 |
identifier_str_mv |
Cardona Howard, F. S. (2020). Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados [Tesis de pregrado, Universidad Cooperativa de Colombia]. Repositorio Institucional UCC. http://hdl.handle.net/20.500.12494/20277 |
dc.relation.references.spa.fl_str_mv |
J. Hong, G. Q. Shen, Y. Feng, W. S. T. Lau, and C. Mao, “Greenhouse gas emissions during the construction phase of a building: A case study in China,” J. Clean. Prod., vol. 103, pp. 249–259, 2015. A. Al-Fakih, B. S. Mohammed, M. S. Liew, and E. Nikbakht, “Incorporation of waste materials in the manufacture of masonry bricks: An update review,” J. Build. Eng., vol. 21, pp. 37–54, 2019. L. Zhang, “Production of bricks from waste materials - A review,” Constr. Build. Mater., vol. 47, pp. 643–655, 2013. M. Sutcu, E. Erdogmus, O. Gencel, A. Gholampour, E. Atan, and T. Ozbakkaloglu, “Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production,” J. Clean. Prod., vol. 233, pp. 753–764, 2019. S. Elavarasan, A. K. Priya, and V. K. Kumar, “Materials Today : Proceedings Manufacturing fired clay brick using fly ash and M À Sand,” Mater. Today Proc., no. xxxx, pp. 1–5, 2020. Y. Chen, Y. Zhang, T. Chen, Y. Zhao, and S. Bao, “Preparation of eco-friendly construction bricks from hematite tailings,” Constr. Build. Mater., vol. 25, no. 4, pp. 2107–2111, 2011. P. Indhiradevi, P. Manikandan, K. Rajkumar, and S. Logeswaran, “A comparative study on usage of cowdung ash and wood ash as partial replacement in flyash brick,” Mater. Today Proc., no. xxxx, pp. 6–10, 2020. M. Sutcu, H. Alptekin, E. Erdogmus, Y. Er, and O. Gencel, “Characteristics of fired clay bricks with waste marble powder addition as building materials,” Constr. Build. Mater., vol. 82, pp. 1–8, 2015. O. Gencel, “Characteristics of fired clay bricks with pumice additive,” Energy Build., vol. 102, pp. 217–224, 2015. A. Seco, J. Omer, S. Marcelino, S. Espuelas, and E. Prieto, “Sustainable unfired bricks manufacturing from construction and demolition wastes,” Constr. Build. Mater., vol. 167, pp. 154–165, 2018. P. Guo, W. Meng, H. Nassif, H. Gou, and Y. Bao, “New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure,” Constr. Build. Mater., vol. 257, p. 119579, 2020. I. Almeshal, B. A. Tayeh, R. Alyousef, H. Alabduljabbar, and A. M. Mohamed, “Eco-friendly concrete containing recycled plastic as partial replacement for sand,” J. Mater. Res. Technol., vol. 9, no. 3, pp. 4631–4643, 2020. J. O. Akinyele, U. T. Igba, and B. G. Adigun, “Effect of waste PET on the structural properties of burnt bricks,” Sci. African, vol. 7, p. e00301, 2020. Prof. J.J. Roberts, “Guidance for lateral resistance How to design masonry structures using Eurocode 6 3. Lateral resistance,” Pd6697, p. 8, 2013. ICONTEC, “NTC 4205. Ingeniería civil y arquitectura. Unidades de mampostería de arcilla cocida. Ladrillos y bloques cerámicos.,” Norma Técnica Colomb., p. 14, 2000. J. O. Akinyele, U. T. Igba, T. O. Ayorinde, and P. O. Jimoh, “Structural efficiency of burnt clay bricks containing waste crushed glass and polypropylene granules,” Case Stud. Constr. Mater., vol. 13, p. e00404, 2020. A. Kumi-Larbi, D. Yunana, P. Kamsouloum, M. Webster, D. C. Wilson, and C. Cheeseman, “Recycling waste plastics in developing countries: Use of low-density polyethylene water sachets to form plastic bonded sand blocks,” Waste Manag., vol. 80, pp. 112–118, 2018. U. Javed, R. A. Khushnood, S. A. Memon, F. E. Jalal, and M. S. Zafar, “Sustainable incorporation of lime-bentonite clay composite for production of ecofriendly bricks,” J. Clean. Prod., vol. 263, p. 121469, 2020. D. A. Ramos Huarachi, G. Gonçalves, A. C. de Francisco, M. H. G. Canteri, and C. M. Piekarski, “Life cycle assessment of traditional and alternative bricks: A review,” Environ. Impact Assess. Rev., vol. 80, no. April 2019, p. 106335, 2020. N. G. Kulkarni and A. B. Rao, “Carbon footprint of solid clay bricks fired in clamps of India,” J. Clean. Prod., vol. 135, pp. 1396–1406, 2016. Fundación para el desarrollo de las nuevas tecnologias del hidrogeno en Aragon and Z. Hytechpark, “Guía para el cálculo de emisiones de CO2,” p. 15, 2011. A. Ukwatta, A. Mohajerani, S. Setunge, and N. Eshtiaghi, “A study of gas emissions during the firing process from bricks incorporating biosolids,” Waste Manag., vol. 74, pp. 413–426, 2018. M. B. Madri, H. H. Fl, and Y. P. Gonz, “Interconectado Nacional Colombia-Sin,” 2017. |
dc.rights.license.none.fl_str_mv |
Atribución – No comercial – Sin Derivar |
dc.rights.accessrights.none.fl_str_mv |
info:eu-repo/semantics/openAccess |
dc.rights.coar.none.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
rights_invalid_str_mv |
Atribución – No comercial – Sin Derivar http://purl.org/coar/access_right/c_abf2 |
eu_rights_str_mv |
openAccess |
dc.format.extent.spa.fl_str_mv |
9 p. |
dc.publisher.spa.fl_str_mv |
Universidad Cooperativa de Colombia, Facultad de Ingenierías, Ingeniería Civil, Medellín y Envigado |
dc.publisher.program.spa.fl_str_mv |
Ingeniería Civil |
dc.publisher.place.spa.fl_str_mv |
Medellín |
institution |
Universidad Cooperativa de Colombia |
bitstream.url.fl_str_mv |
https://repository.ucc.edu.co/bitstreams/51ce19b2-4d6f-4673-ae71-493cab39c0fb/download https://repository.ucc.edu.co/bitstreams/8660f7ae-3922-43fc-b421-7b1ffc7f018e/download https://repository.ucc.edu.co/bitstreams/336d44e0-4d93-4723-9f5f-aa0286eda52d/download https://repository.ucc.edu.co/bitstreams/8262e762-3b6d-461e-b3df-61e4d64c794a/download https://repository.ucc.edu.co/bitstreams/ab38ffff-581d-4dfd-add7-d4b5482ae5f2/download https://repository.ucc.edu.co/bitstreams/9ece6895-23b7-43d0-9f9f-2264af38341c/download https://repository.ucc.edu.co/bitstreams/22782447-3f37-4ceb-a179-e941ea8a0b9d/download |
bitstream.checksum.fl_str_mv |
bec0dcc7e792b28bb30b3e66db936da4 59cc5f121ff59b059c9c7c89b09eee66 3bce4f7ab09dfc588f126e1e36e98a45 cd8bf4c6d129ea66876ae796098cebed 1aeff14bedb74f34d4e3ca4732504fb4 7694f8834026234a7d2f4c0359b6d195 32bad7f2b1617ebe79a6b5277bb3cf4f |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositorio Institucional Universidad Cooperativa de Colombia |
repository.mail.fl_str_mv |
bdigital@metabiblioteca.com |
_version_ |
1814246815548047360 |
spelling |
Arbeláez Pérez, Oscar FelipeCardona Howard, Faber Sneider2020-09-23T17:00:09Z2020-09-23T17:00:09Z2020-09-11https://hdl.handle.net/20.500.12494/20277Cardona Howard, F. S. (2020). Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados [Tesis de pregrado, Universidad Cooperativa de Colombia]. Repositorio Institucional UCC. http://hdl.handle.net/20.500.12494/20277La necesidad de materiales de construcción alternativos y el llamado a un medio ambiente más limpio, ha llevado al reúso de materiales, especialmente aquellos no biodegradables, tales como el vidrio y el plástico La eliminación de este material no biodegradable ha sido un gran desafío. En este trabajo se prepararon mezclas de plástico, agregado fino y residuos de vidrio, en mezclas individuales y combinadas. A partir de las mezclas preparadas se elaboraron especímenes prismáticos de (0.124×0.07×0.100) m, los cuales se fundieron en un horno de convección hasta 240 °C por 3 horas y posterior enfriamiento por convección natural. Se evaluó la densidad y la resistencia a la compresión de los especímenes preparados. Los resultados experimentales mostraron un aumento en la densidad con el contenido de plástico y agregados, siendo ligeramente mayor en las muestras con mayor contenido de agregados. Asimismo, se observó un aumento en la resistencia a la compresión, siendo mayor para la muestra que contenía solo plástico y agregado, la cual mostró una mejora del 243% con respecto al material de referencia (preparada solo a partir de plástico). Asimismo, se encontró una disminución en la emisión del dióxido de carbono. Dado del potencial de las mezclas preparadas, se espera que los resultados encontrados permitan generar una ruta de gestión de residuos plásticos y vidrio.The need for alternative building materials and the call for a cleaner environment has led to the reuse of materials, especially non-biodegradable ones, such as glass and plastic. The disposal of this non-biodegradable material has been a major challenge. In this work, mixtures of plastic, fine aggregate and waste glass were prepared in individual and combined mixtures. From the prepared mixtures, prismatic specimens of 0.124×0.07×0.100 were produced which were melted in a convection oven up to 240 °C for 3 hours and then cooled by natural convection. The density and compressive strength of the prepared specimens were evaluated. The experimental results showed an increase in density with the plastic and aggregate content, being slightly higher in the samples with higher aggregate content. An increase in compressive strength was also observed, being higher for the sample containing plastic and aggregate, which showed an improvement of 243% over the reference material (prepared from plastic only). A decrease in carbon dioxide emissions was also found. Given the potential of the prepared mixtures, it is expected that the results found will enable the generation of a management route for plastic and glass waste.faber.cardonah@campusucc.edu.co9 p.Universidad Cooperativa de Colombia, Facultad de Ingenierías, Ingeniería Civil, Medellín y EnvigadoIngeniería CivilMedellínLadrillosResistencia a compresiónAgregadosPETFactor de emisiónDióxido de carbonoTG 2020 ICI 20277brickscompressive strengthfine aggregatesPETemission factorcarbon dioxide.Propiedades mecánicas y factor de emisión de co2 de ladrillos preparados a partir residuos de plástico, vidrio y agregados.Trabajo de grado - Pregradohttp://purl.org/coar/resource_type/c_7a1finfo:eu-repo/semantics/bachelorThesisinfo:eu-repo/semantics/acceptedVersionAtribución – No comercial – Sin Derivarinfo:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2J. Hong, G. Q. Shen, Y. Feng, W. S. T. Lau, and C. Mao, “Greenhouse gas emissions during the construction phase of a building: A case study in China,” J. Clean. Prod., vol. 103, pp. 249–259, 2015.A. Al-Fakih, B. S. Mohammed, M. S. Liew, and E. Nikbakht, “Incorporation of waste materials in the manufacture of masonry bricks: An update review,” J. Build. Eng., vol. 21, pp. 37–54, 2019.L. Zhang, “Production of bricks from waste materials - A review,” Constr. Build. Mater., vol. 47, pp. 643–655, 2013.M. Sutcu, E. Erdogmus, O. Gencel, A. Gholampour, E. Atan, and T. Ozbakkaloglu, “Recycling of bottom ash and fly ash wastes in eco-friendly clay brick production,” J. Clean. Prod., vol. 233, pp. 753–764, 2019.S. Elavarasan, A. K. Priya, and V. K. Kumar, “Materials Today : Proceedings Manufacturing fired clay brick using fly ash and M À Sand,” Mater. Today Proc., no. xxxx, pp. 1–5, 2020.Y. Chen, Y. Zhang, T. Chen, Y. Zhao, and S. Bao, “Preparation of eco-friendly construction bricks from hematite tailings,” Constr. Build. Mater., vol. 25, no. 4, pp. 2107–2111, 2011.P. Indhiradevi, P. Manikandan, K. Rajkumar, and S. Logeswaran, “A comparative study on usage of cowdung ash and wood ash as partial replacement in flyash brick,” Mater. Today Proc., no. xxxx, pp. 6–10, 2020.M. Sutcu, H. Alptekin, E. Erdogmus, Y. Er, and O. Gencel, “Characteristics of fired clay bricks with waste marble powder addition as building materials,” Constr. Build. Mater., vol. 82, pp. 1–8, 2015.O. Gencel, “Characteristics of fired clay bricks with pumice additive,” Energy Build., vol. 102, pp. 217–224, 2015.A. Seco, J. Omer, S. Marcelino, S. Espuelas, and E. Prieto, “Sustainable unfired bricks manufacturing from construction and demolition wastes,” Constr. Build. Mater., vol. 167, pp. 154–165, 2018.P. Guo, W. Meng, H. Nassif, H. Gou, and Y. Bao, “New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure,” Constr. Build. Mater., vol. 257, p. 119579, 2020.I. Almeshal, B. A. Tayeh, R. Alyousef, H. Alabduljabbar, and A. M. Mohamed, “Eco-friendly concrete containing recycled plastic as partial replacement for sand,” J. Mater. Res. Technol., vol. 9, no. 3, pp. 4631–4643, 2020.J. O. Akinyele, U. T. Igba, and B. G. Adigun, “Effect of waste PET on the structural properties of burnt bricks,” Sci. African, vol. 7, p. e00301, 2020.Prof. J.J. Roberts, “Guidance for lateral resistance How to design masonry structures using Eurocode 6 3. Lateral resistance,” Pd6697, p. 8, 2013.ICONTEC, “NTC 4205. Ingeniería civil y arquitectura. Unidades de mampostería de arcilla cocida. Ladrillos y bloques cerámicos.,” Norma Técnica Colomb., p. 14, 2000.J. O. Akinyele, U. T. Igba, T. O. Ayorinde, and P. O. Jimoh, “Structural efficiency of burnt clay bricks containing waste crushed glass and polypropylene granules,” Case Stud. Constr. Mater., vol. 13, p. e00404, 2020.A. Kumi-Larbi, D. Yunana, P. Kamsouloum, M. Webster, D. C. Wilson, and C. Cheeseman, “Recycling waste plastics in developing countries: Use of low-density polyethylene water sachets to form plastic bonded sand blocks,” Waste Manag., vol. 80, pp. 112–118, 2018.U. Javed, R. A. Khushnood, S. A. Memon, F. E. Jalal, and M. S. Zafar, “Sustainable incorporation of lime-bentonite clay composite for production of ecofriendly bricks,” J. Clean. Prod., vol. 263, p. 121469, 2020.D. A. Ramos Huarachi, G. Gonçalves, A. C. de Francisco, M. H. G. Canteri, and C. M. Piekarski, “Life cycle assessment of traditional and alternative bricks: A review,” Environ. Impact Assess. Rev., vol. 80, no. April 2019, p. 106335, 2020.N. G. Kulkarni and A. B. Rao, “Carbon footprint of solid clay bricks fired in clamps of India,” J. Clean. Prod., vol. 135, pp. 1396–1406, 2016.Fundación para el desarrollo de las nuevas tecnologias del hidrogeno en Aragon and Z. Hytechpark, “Guía para el cálculo de emisiones de CO2,” p. 15, 2011.A. Ukwatta, A. Mohajerani, S. Setunge, and N. Eshtiaghi, “A study of gas emissions during the firing process from bricks incorporating biosolids,” Waste Manag., vol. 74, pp. 413–426, 2018.M. B. Madri, H. H. Fl, and Y. P. Gonz, “Interconectado Nacional Colombia-Sin,” 2017.PublicationORIGINAL2020_propiedades_mecanicas_emision..pdf2020_propiedades_mecanicas_emision..pdfTrabajo de gradoapplication/pdf785496https://repository.ucc.edu.co/bitstreams/51ce19b2-4d6f-4673-ae71-493cab39c0fb/downloadbec0dcc7e792b28bb30b3e66db936da4MD512020_propiedades_mecanicas_emision_formato_licenciadeuso..pdf2020_propiedades_mecanicas_emision_formato_licenciadeuso..pdfLicencia de Usoapplication/pdf719917https://repository.ucc.edu.co/bitstreams/8660f7ae-3922-43fc-b421-7b1ffc7f018e/download59cc5f121ff59b059c9c7c89b09eee66MD52LICENSElicense.txtlicense.txttext/plain; charset=utf-84334https://repository.ucc.edu.co/bitstreams/336d44e0-4d93-4723-9f5f-aa0286eda52d/download3bce4f7ab09dfc588f126e1e36e98a45MD53THUMBNAIL2020_propiedades_mecanicas_emision..pdf.jpg2020_propiedades_mecanicas_emision..pdf.jpgGenerated Thumbnailimage/jpeg6200https://repository.ucc.edu.co/bitstreams/8262e762-3b6d-461e-b3df-61e4d64c794a/downloadcd8bf4c6d129ea66876ae796098cebedMD542020_propiedades_mecanicas_emision_formato_licenciadeuso..pdf.jpg2020_propiedades_mecanicas_emision_formato_licenciadeuso..pdf.jpgGenerated Thumbnailimage/jpeg5129https://repository.ucc.edu.co/bitstreams/ab38ffff-581d-4dfd-add7-d4b5482ae5f2/download1aeff14bedb74f34d4e3ca4732504fb4MD55TEXT2020_propiedades_mecanicas_emision..pdf.txt2020_propiedades_mecanicas_emision..pdf.txtExtracted texttext/plain29909https://repository.ucc.edu.co/bitstreams/9ece6895-23b7-43d0-9f9f-2264af38341c/download7694f8834026234a7d2f4c0359b6d195MD562020_propiedades_mecanicas_emision_formato_licenciadeuso..pdf.txt2020_propiedades_mecanicas_emision_formato_licenciadeuso..pdf.txtExtracted texttext/plain5858https://repository.ucc.edu.co/bitstreams/22782447-3f37-4ceb-a179-e941ea8a0b9d/download32bad7f2b1617ebe79a6b5277bb3cf4fMD5720.500.12494/20277oai:repository.ucc.edu.co:20.500.12494/202772024-08-10 22:04:23.277open.accesshttps://repository.ucc.edu.coRepositorio Institucional Universidad Cooperativa de Colombiabdigital@metabiblioteca.comVU5JVkVSU0lEQUQgQ09PUEVSQVRJVkEgREUgQ09MT01CSUEKUkVQT1NJVE9SSU9TIElOU1RJVFVDSU9OQUxFUwpMSUNFTkNJQSBERSBVU08KClBvciBtZWRpbyBkZWwgcHJlc2VudGUgZG9jdW1lbnRvLCBlbCBBdXRvcihlcyksIG1heW9yIChlcykgZGUgZWRhZCwgcXVpZW4gZW4gYWRlbGFudGUgc2UgZGVub21pbmFyw6EgZWwgQVVUT1IsIGNvbmZpZXJlIGEgbGEgVU5JVkVSU0lEQUQgQ09PUEVSQVRJVkEgREUgQ09MT01CSUEsIGNvbiBOSVQuIDg2MC0wMjk5MjQtNywgdW5hIExJQ0VOQ0lBIERFIFVTTyBkZSBvYnJhLCBiYWpvIGxhcyBzaWd1aWVudGVzIGNvbmRpY2lvbmVzLgoKQ0zDgVVTVUxBUwoKUFJJTUVSQS4gT2JqZXRvLiBFTCBBVVRPUiBwb3IgZXN0ZSBhY3RvIGF1dG9yaXphIGxhIHV0aWxpemFjacOzbiBkZSBsYSBvYnJhLCBkZSBjb25mb3JtaWRhZCBjb24gbG8gZXN0aXB1bGFkbyBhIGNvbnRpbnVhY2nDs246IAoKKGEpIFBhcmEgZWZlY3RvcyBkZSBsYSBwcmVzZW50ZSBsaWNlbmNpYSBzZSBhdXRvcml6YSBsYSByZXByb2R1Y2Npw7NuIGRlIGxhIG9icmEgYW50ZXJpb3JtZW50ZSBjaXRhZGEsIGxhIGN1YWwgc2UgYWxvamFyw6EgZW4gZm9ybWF0byBkaWdpdGFsIGVuIGxhcyBwbGF0YWZvcm1hcyBvIHJlcG9zaXRvcmlvcyBhZG1pbmlzdHJhZG9zIHBvciBsYSBVTklWRVJTSURBRCBvIGVuIG90cm8gdGlwbyBkZSByZXBvc2l0b3Jpb3MgZXh0ZXJub3MgbyBww6FnaW5hcyB3ZWIgZXNjb2dpZG9zIHBvciBsYSBVTklWRVJTSURBRCwgcGFyYSBmaW5lcyBkZSBkaWZ1c2nDs24geSBkaXZ1bGdhY2nDs24uIEFkaWNpb25hbG1lbnRlLCBzZSBhdXRvcml6YSBhIHF1ZSBsb3MgdXN1YXJpb3MgaW50ZXJub3MgeSBleHRlcm5vcyBkZSBkaWNoYXMgcGxhdGFmb3JtYXMgbyByZXBvc2l0b3Jpb3MgcmVwcm9kdXpjYW4gbyBkZXNjYXJndWVuIGxhIG9icmEsIHNpbiDDoW5pbW8gZGUgbHVjcm8sIHBhcmEgZmluZXMgcHJpdmFkb3MsIGVkdWNhdGl2b3MgbyBhY2Fkw6ltaWNvczsgc2llbXByZSB5IGN1YW5kbyBubyBzZSB2aW9sZW4gYWN1ZXJkb3MgY29uIGVkaXRvcmVzLCBwZXJpb2RvcyBkZSBlbWJhcmdvIG8gYWN1ZXJkb3MgZGUgY29uZmlkZW5jaWFsaWRhZCBxdWUgYXBsaXF1ZW4uCgooYikgU2UgYXV0b3JpemEgbGEgY29tdW5pY2FjacOzbiBww7pibGljYSB5IGxhIHB1ZXN0YSBhIGRpc3Bvc2ljacOzbiBkZSBsYSBvYnJhIG1lbmNpb25hZGEsIGVuIGFjY2VzbyBhYmllcnRvLCBwYXJhIHN1IHV0aWxpemFjacOzbiBlbiBsYXMgcGxhdGFmb3JtYXMgbyByZXBvc2l0b3Jpb3MgYWRtaW5pc3RyYWRvcyBwb3IgbGEgVU5JVkVSU0lEQUQuCgooYykgTG8gYW50ZXJpb3IgZXN0YXLDoSBzdWpldG8gYSBsYXMgZGVmaW5pY2lvbmVzIGNvbnRlbmlkYXMgZW4gbGEgRGVjaXNpw7NuIEFuZGluYSAzNTEgZGUgMTk5MyB5IGxhIExleSAyMyBkZSAxOTgyLgoKClNFR1VOREEuIE9yaWdpbmFsaWRhZCB5IHJlY2xhbWFjaW9uZXMuIEVsIEFVVE9SIGRlY2xhcmEgcXVlIGxhIE9CUkEgZXMgb3JpZ2luYWwgeSBxdWUgZXMgZGUgc3UgY3JlYWNpw7NuIGV4Y2x1c2l2YSwgbm8gZXhpc3RpZW5kbyBpbXBlZGltZW50byBkZSBjdWFscXVpZXIgbmF0dXJhbGV6YSAoZW1iYXJnb3MsIHVzbyBkZSBtYXRlcmlhbCBwcm90ZWdpZG8gcG9yIGRlcmVjaG9zIGRlIGF1dG9yKSBwYXJhIGxhIGNvbmNlc2nDs24gZGUgbG9zIGRlcmVjaG9zIHByZXZpc3RvcyBlbiBlc3RlIGFjdWVyZG8uIEVsIEFVVE9SIHJlc3BvbmRlcsOhIHBvciBjdWFscXVpZXIgYWNjacOzbiBkZSByZWl2aW5kaWNhY2nDs24sIHBsYWdpbyB1IG90cmEgY2xhc2UgZGUgcmVjbGFtYWNpw7NuIHF1ZSBhbCByZXNwZWN0byBwdWRpZXJhIHNvYnJldmVuaXIuCgpURVJDRVJBLiBDb250cmFwcmVzdGFjacOzbi4gRWwgQVVUT1IgYXV0b3JpemEgYSBxdWUgc3Ugb2JyYSBzZWEgdXRpbGl6YWRhIGRlIGNvbmZvcm1pZGFkIGNvbiBsYSBjbMOhdXN1bGEgUFJJTUVSQSBkZSBmb3JtYSBncmF0dWl0YSwgZXMgZGVjaXIsIHF1ZSBsYSB1dGlsaXphY2nDs24gZGUgbGEgbWlzbWEgbm8gZ2VuZXJhIG5pbmfDum4gcGFnbyBvIHJlZ2Fsw61hcyBlbiBmYXZvciBkZSBlc3RlLgoKQ1VBUlRBLiBUaXR1bGFyaWRhZCBkZSBkZXJlY2hvcy4gRWwgcHJlc2VudGUgY29udHJhdG8gbm8gdHJhbnNmaWVyZSBsYSB0aXR1bGFyaWRhZCBkZSBsb3MgZGVyZWNob3MgcGF0cmltb25pYWxlcyBzb2JyZSBsYXMgb2JyYXMgYW50ZXJpb3JtZW50ZSBtZW5jaW9uYWRhcyBhIGxhIFVOSVZFUlNJREFELiDDmm5pY2FtZW50ZSBoYWNlIHJlbGFjacOzbiBhIHVuYSBsaWNlbmNpYSBubyBleGNsdXNpdmEgZW4gbG9zIHTDqXJtaW5vcyB5IGNvbmRpY2lvbmVzIGFudGVyaW9ybWVudGUgcGFjdGFkb3MuCgpRVUlOVEEuIENyw6lkaXRvcy4gTGEgVU5JVkVSU0lEQUQgc2UgY29tcHJvbWV0ZSBhIGRhciBhbCBBVVRPUiwgZWwgcmVjb25vY2ltaWVudG8gZGVudHJvIGNhZGEgZm9ybWEgZGUgdXRpbGl6YWNpw7NuIGVuIGxhIG9icmEuIExvcyBjcsOpZGl0b3MgZGViZW4gZmlndXJhciBlbiBjYWRhIHVubyBkZSBsb3MgZm9ybWF0b3MgbyByZWdpc3Ryb3MgZGUgcHVibGljYWNpw7NuLiBObyBjb25zdGl0dWlyw6EgdW5hIHZpb2xhY2nDs24gYSBsb3MgZGVyZWNob3MgbW9yYWxlcyBkZWwgYXV0b3IgbGEgbm8gcmVwcm9kdWNjacOzbiwgY29tdW5pY2FjacOzbiBvIGRlbcOhcyB1dGlsaXphY2lvbmVzIGRlIGxhIG9icmEuIExhIHV0aWxpemFjacOzbiBvIG5vIGRlIGxhIG9icmEsIGFzw60gY29tbyBzdSBmb3JtYSBkZSB1dGlsaXphY2nDs24gc2Vyw6EgZmFjdWx0YWQgZXhjbHVzaXZhIGRlIGxhIFVOSVZFUlNJREFELgogClNFWFRBLiBEdXJhY2nDs24geSB0ZXJyaXRvcmlvLiBMYSBwcmVzZW50ZSBsaWNlbmNpYSBkZSB1c28gcXVlIHNlIG90b3JnYSBhIGZhdm9yIGRlIGxhIFVOSVZFUlNJREFEIHRlbmRyw6EgdW5hIGR1cmFjacOzbiBlcXVpdmFsZW50ZSBhbCB0w6lybWlubyBkZSBwcm90ZWNjacOzbiBsZWdhbCBkZSBsYSBvYnJhIHkgcGFyYSB0b2RvcyBsb3MgcGHDrXNlcyBkZWwgbXVuZG8uCgpTw4lQVElNQS4gVXNvIGRlIENyZWF0aXZlIENvbW1vbnMuIEVsIEFVVE9SIGF1dG9yaXphcsOhIGxhIGRpZnVzacOzbiBkZSBzdSBjb250ZW5pZG8gYmFqbyB1bmEgbGljZW5jaWEgQ3JlYXRpdmUgQ29tbW9ucyBhdHJpYnVjacOzbiA0LjAgaW50ZXJuYWNpb25hbCwgcXVlIGRlYmVyw6EgaW5jbHVpcnNlIGVuIGVsIGNvbnRlbmlkby4gCgpPQ1RBVkEuIERlcmVjaG8gZGUgZXhjbHVzacOzbi4gQ2FkYSBhdXRvciBwdWVkZSBpbmRpY2FyIGVuIGVsIG1vbWVudG8gZGUgZGVww7NzaXRvIGRlbCBjb250ZW5pZG8gcXVlIGVsIHRleHRvIGNvbXBsZXRvIGRlIGxhIHByb2R1Y2Npw7NuIGFjYWTDqW1pY2EgbyBjaWVudMOtZmljYSBubyBlc3RlIGNvbiBhY2Nlc28gYWJpZXJ0byBlbiBlbCBSZXBvc2l0b3JpbyBJbnN0aXR1Y2lvbmFsIHBvciBtb3Rpdm9zIGRlIGNvbmZpZGVuY2lhbGlkYWQsIHBvcnF1ZSBzZSBlbmN1ZW50cmUgZW4gdsOtYXMgZGUgb2J0ZW5lciB1biBkZXJlY2hvIGRlIHByb3BpZWRhZCBpbmR1c3RyaWFsIG8gZXhpc3RpciBhY3VlcmRvcyBwcmV2aW9zIGNvbiB0ZXJjZXJvcyAoZWRpdG9yaWFsZXMsIHJldmlzdGFzIGNpZW50w61maWNhcywgb3RyYXMgaW5zdGl0dWNpb25lcykuIEVsIGF1dG9yIHNlIGNvbXByb21ldGUgYSBkZXBvc2l0YXIgbG9zIG1ldGFkYXRvcyBlIGluZm9ybWFyIGVsIHRpZW1wbyBkZSBlbWJhcmdvIGR1cmFudGUgZWwgY3VhbCBlbCB0ZXh0byBjb21wbGV0byB0ZW5kcsOhIGFjY2VzbyByZXN0cmluZ2lkby4gCgpOT1ZFTkEuIEVsIEFVVE9SIGFsIGFjZXB0YXIgZXN0YSBsaWNlbmNpYSBhZHVjZSBxdWUgZXN0YSBwcm9kdWNjacOzbiBzZSBkZXNhcnJvbGzDsyBlbiBlbCBwZXJpb2RvIGVuIHF1ZSBzZSBlbmN1ZW50cmEgY29uIHbDrW5jdWxvcyBjb24gTGEgVW5pdmVyc2lkYWQuCgpEw4lDSU1BLiBOb3JtYXMgYXBsaWNhYmxlcy4gUGFyYSBsYSBpbnRlcnByZXRhY2nDs24geSBjdW1wbGltaWVudG8gZGVsIHByZXNlbnRlIGFjdWVyZG8gbGFzIHBhcnRlcyBzZSBzb21ldGVuIGEgbGEgRGVjaXNpw7NuIEFuZGluYSAzNTEgZGUgMTk5MywgbGEgTGV5IDIzIGRlIDE5ODIgeSBkZW3DoXMgbm9ybWFzIGFwbGljYWJsZXMgZGUgQ29sb21iaWEuIEFkZW3DoXMsIGEgbGFzIG5vcm1hcyBJbnN0aXR1Y2lvbmFsZXMgcXVlIGFwbGlxdWVuLgoKTGEgcHJlc2VudGUgbGljZW5jaWEgc2UgYXV0b3JpemEgZW4gbGEgZmVjaGEgZGUgcHVibGljYWNpw7NuIGVuIGxvcyByZXBvc2l0b3Jpb3MgaW5zdGl0dWNpb25hbGVzLgo= |